Check lifting eye bolt standards, Size Chart and Stainless Steel Eye Bolt manufacturer in India
How Much Weight Can An Eye Bolt Hold?
The weight holding capacity of an eye bolt is dependent on its shank diameter and the angle of a sling. A shank with diameters of 14 will have a working load in line pull of 650 lbs. If the sling angle is 60 degrees, they can handle 420 lbs. Similarly, a sling angle of fewer than 45 degrees can handle 160 lbs. As the shank diameter increases their weight carrying capacity increases.
What Is The Difference Between An Swivel Eye Bolt And A Ring Eye Bolt?
A ring eye bolt is a loop shaped like an eye. It is popular rigging hardware and acts as an anchoring point for different applications. These eye bolts are stationary, and only a few devices can accommodate an angular lift. They are common in rigging, hoisting, pulling, and other applications.
A swivel eye bolt is a rigging hardware that screws itself on an engineering lifting point on load. The lifting point is designed to allow rigging coming off the host to connect with the load. They have a similar function as an eye bolt; however, they can swivel to accommodate lifting angles without causing any damage. These bolts are often used to lift steel plates, motors, containers, etc.
What Are Lifting Eye Bolts Used For?
A lifting eye bolt is a mechanical fastener that is used to attach it to a structure. These bolts create a connection point for anchoring, rigging, pulling, pushing, and hoisting applications. These eye bolts are also used across different industrial applications.
Manufacturing Process Of Forged Eye Bolts
Forging is a metal fabrication process that allows for uniformly heating a piece of metal. The method used for producing eye bolts is as follows. Dies are designed and fabricated followed by billet cutting and heating. The bolts are drop forged and trimmed to remove redundant material. The material is then heat treated and shot blasted as per specifications. This is followed by the machining and threading process. Finally, the product is surface treated and inspected before dispatch.
View Difference Of Stainless Steel Eye Bolts Price In India And China
The price of stainless steel eye bolts is based on thickness, grade, and size. The price of the SS eye bolts in India starts at $2.5 per piece. Similarly, the price of these bolts in China starts at $3.93 per piece.
Manufacturer and supplier of ME M8 M10 Eye Bolt Screw, Eye Hook Bolt and Eye Bolt Anchor in UNF/ UNC threads
Table of Content
- Stainless Steel Eye Bolt Specifications
- Eye Bolt Price List
- Types Of Ss Eye Bolt
- Heavy Duty Eye Bolt Drawing
- Eye Bolt Anchor Weight
- Long Eye Bolt Dimension
- Dimension Chart Of Forged Eye Bolt
- DIN 580 Eye Bolt Dimensions
- Testing Done On Swivel Eye Bolt
- Lifting Eye Bolt Dimensions
- What Is The Difference Between A Screw Eye And An Eye Bolt?
Stainless Steel Eye Bolt Specifications
| Standard | Italian, ISO, British Indian PN, EU, SAE Polish IS, BS, DIN, ASME, IFI, CSN, |
| Coating | Hot Dip galvanized Zinc Plated PTFE Coated Yellow Zinc PlatedBlack Zinc Plated Blue Zinc Plated Zinc Cobalt PlatedBlack Phosphate Aluminium Zinc Flake Coated Nickel Plated Eye Bolts |
| High Tensile grades | 8.8 Bolts 10.9 12.9 14.9 Eye Bolts |
| Sizes | M2.5, M30, M14, M3, M24, M20, M10, M6, M12, M16, M5, M2, M4, M36, M8,, M100 to M160 |
| Length | 3/8 to 8 inches |
| Forming | DIN 444 Cold Forged & Hot Forged Eye Bolts |
Manufacturing SS Eye Bolt and Heavy Duty Eye Bolts in Extra Fine UNEF threads
| Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
| LIFTING EYE BOLTS (DIN 580-M10-ST) | ₹ 64/ PCS | $ 0.80 | € 0.79 | SAR 3.01 | RM 3.60 |
| EYE BOLT 120X20MM | ₹ 58/ PCS | $ 0.73 | € 0.72 | SAR 2.74 | RM 3.28 |
| EYE BOLTS TYPE B STAINLESS STEEL A2 M 10 X 40 | ₹ 90/ PCS | $ 1.13 | € 1.11 | SAR 4.25 | RM 5.08 |
| EYE-BOLT M16X160 WITH 2 NUTS STAINLESS STEEL | ₹ 523/ NOS | $ 6.57 | € 6.47 | SAR 24.69 | RM 29.55 |
| LIFTING EYE BOLTS STAINLESS STEEL A4 M 12 | ₹ 196/ PCS | $ 2.46 | € 2.42 | SAR 9.24 | RM 11.07 |
| LIFTING DIN 444 eye bolt A 4 M 24 | ₹ 1,095/ PCS | $ 13.75 | € 13.54 | SAR 51.67 | RM 61.85 |
Eye Bolt
Lifting Eye Bolt
Stainless Steel Eye Bolt
Me M8 M10 Eye Bolt Screw
Eye Hook Bolt
Eye Bolt Anchor
Ss Eye Bolt
Heavy Duty Eye Bolts
Heavy Duty Eye Bolt Anchor
Swivel Eye Bolt
Eye Bolt Supplier in India offers Heat-treated Heavy Duty Eye Bolt Anchor with higher shear strength
| Weight in kilogram per pieced | Size |
|---|---|
| 0.005 | M8 |
| 0.009 | M10 |
| 0.016 | M12 |
| 0.024 | M16 |
| 0.036 | M20 |
| 0.072 | M24 |
| 1.032 | M30 |
| 2.008 | M36 |
| 3.011 | M42 |
| 5.002 | M48 |
| 6.069 | M56 |
| 9.030 | M64 |
| 18.05 | M72 |
| 27.03 | M80 |
| 36.04 | M100 |
| Safe Working Load | Thread Length | Diameter Base | Weight Each | Diameter Thread | Diameter Eye Inside | Diameter Eye Outside | Height | Thickness Collar |
|---|---|---|---|---|---|---|---|---|
| Tonnes | h (milimeter) | b (milimeter) | kg | a (milimeter) | e (milimeter) | c (milimeter) | g (milimeter) | f (milimeter) |
| 0.040 | 178 | 28 | 0.025 | 12 | 19 | 41 | 45 | 11 |
| 0.025 | 178 | 22 | 0.018 | 10 | 15 | 33 | 36 | 7 |
| 4.000 | 178 | 71 | 2.080 | 30 | 48 | 104 | 116 | 24 |
| 0.080 | 178 | 36 | 0.044 | 16 | 24 | 52 | 58 | 14 |
| 0.050 | 178 | 36 | 0.040 | 14 | 24 | 52 | 58 | 14 |
| 1.060 | 178 | 43 | 0.070 | 20 | 29 | 62 | 69 | 17 |
| 1.000 | 178 | 43 | 0.070 | 18 | 29 | 62 | 69 | 17 |
| 2.050 | 178 | 57 | 1.050 | 24 | 38 | 82 | 87 | 19 |
Finish And Materials Of Eye Bolts
| Material | Threads | Surface Finish |
|---|---|---|
|
|
|
Manufacturer of SS Collared/ threaded eye bolt in Mumbai, view Swivel Eye Bolt Torque, dimensions and weight chart
Dimension Chart Of Forged Eye Bolt
| Length (B) |
Outside Diameter (C) |
Inside Diameter (D) |
Overall Length* (E) |
Thread Length* (F) |
|---|---|---|---|---|
| 1/4-20 (A) | ||||
| 3 | 1 | 1/2 | 4-7/32 | 1-1/2 |
| 2 | 1 | 1/2 | 3-7/32 | 1-1/2 |
| 5 | 1 | 1/2 | 6-7/32 | 2-1/2 |
| 4 | 1 | 1/2 | 5-7/32 | 2 |
| 6 | 1 | 1/2 | 7-7/32 | 3 |
| 5/16-18 (A) | ||||
| 3-1/4 | 1-1/4 | 5/8 | 4-23/32 | 1-1/2 |
| 2-1/4 | 1-1/4 | 5/8 | 3-23/32 | 1-1/2 |
| 5 | 1-1/4 | 5/8 | 6-15/32 | 2-1/2 |
| 4-1/4 | 1-1/4 | 5/8 | 5-23/32 | 2-1/2 |
| 6 | 1-1/4 | 5/8 | 7-15/32 | 3 |
| 3/8-16 (A) | ||||
| 3 | 1-1/2 | 3/4 | 4-3/4 | 1-1/2 |
| 2-1/2 | 1-1/2 | 3/4 | 4-1/4 | 1-1/2 |
| 10 | 1-1/2 | 3/4 | 11-3/4 | 4 |
| 4 | 1-1/2 | 3/4 | 5-3/4 | 2 |
| 4-1/2 | 1-1/2 | 3/4 | 6-1/4 | 3 |
| 8 | 1-1/2 | 3/4 | 9-3/4 | 4 |
| 4-1/4 | 1-1/2 | 3/4 | 6 | 2 |
| 6 | 1-1/2 | 3/4 | 7-3/4 | 3 |
| 5 | 1-1/2 | 3/4 | 6-3/4 | 3 |
| 1/2-13 (A) | ||||
| 3-1/4 | 2 | 1 | 5-7/16 | 2 |
| 12 | 2 | 1 | 14-3/16 | 4 |
| 2 | 2 | 1 | 4-3/16 | 1-5/8 |
| 10 | 2 | 1 | 12-3/16 | 4 |
| 4-1/2 | 2 | 1 | 6-11/16 | 3 |
| 4 | 2 | 1 | 6-3/16 | 3 |
| 8 | 2 | 1 | 10-3/16 | 4 |
| 6 | 2 | 1 | 8-3/16 | 3 |
| 5/8-11 (A) | ||||
| 4-1/2 | 2-1/2 | 1-3/8 | 7-1/8 | 3 |
| 4 | 2-1/2 | 1-3/8 | 6-5/8 | 3 |
| 8 | 2-1/2 | 1-3/8 | 10-5/8 | 4 |
| 6 | 2-1/2 | 1-3/8 | 8-5/8 | 3 |
| 12 | 2-1/2 | 1-3/8 | 14-5/8 | 4 |
| 10 | 2-1/2 | 1-3/8 | 12-5/8 | 4 |
| 18 | 2-1/2 | 1-3/8 | 20-5/8 | 6 |
| 15 | 2-1/2 | 1-3/8 | 17-5/8 | 6 |
| 24 | 2-1/2 | 1-3/8 | 26-5/8 | 6 |
| 3/4-10 (A) | ||||
| 4-1/2 | 2-13/16 | 1-1/2 | 7-3/8 | 3 |
| 4 | 2-13/16 | 1-1/2 | 6-7/8 | 3 |
| 8 | 2-13/16 | 1-1/2 | 10-7/8 | 4 |
| 6 | 2-13/16 | 1-1/2 | 8-7/8 | 3 |
| 12 | 2-13/16 | 1-1/2 | 14-7/8 | 4 |
| 10 | 2-13/16 | 1-1/2 | 12-7/8 | 4 |
| 18 | 2-13/16 | 1-1/2 | 20-7/8 | 6 |
| 15 | 2-13/16 | 1-1/2 | 17-7/8 | 6 |
| 24 | 2-13/16 | 1-1/2 | 26-7/8 | 6 |
| 7/8-9 (A) | ||||
| 6 | 3-1/2 | 1-3/4 | 9-1/4 | 3 |
| 5 | 3-1/2 | 1-3/4 | 8-1/4 | 3 |
| 10 | 3-1/2 | 1-3/4 | 13-1/4 | 4 |
| 8 | 3-1/2 | 1-3/4 | 11-1/4 | 4 |
| 18 | 3-1/2 | 1-3/4 | 21-1/4 | 6 |
| 12 | 3-1/2 | 1-3/4 | 15-1/4 | 4 |
| 24 | 3-1/2 | 1-3/4 | 27-1/4 | 6 |
| 1-8 (A) | ||||
| 8 | 4 | 2 | 11-5/8 | 4 |
| 6 | 4 | 2 | 9-5/8 | 3 |
| 12 | 4 | 2 | 15-5/8 | 4 |
| 10 | 4 | 2 | 13-5/8 | 4 |
| 18 | 4 | 2 | 21-5/8 | 6 |
| 15 | 4 | 2 | 18-5/8 | 6 |
| 24 | 4 | 2 | 27-5/8 | 6 |
| 1-1/4-7 (A) | ||||
| 8 | 4-7/16 | 2-3/16 | 12-1/2 | 4 |
| 6 | 4-7/16 | 2-3/16 | 10-1/2 | 3 |
| 18 | 4-7/16 | 2-3/16 | 22-1/2 | 6 |
| 12 | 4-7/16 | 2-3/16 | 16-1/2 | 4 |
| 24 | 4-7/16 | 2-3/16 | 28-1/2 | 6 |
| 1-1/2-6 (A) | ||||
| 12 | 5-3/16 | 2-1/2 | 17-1/4 | 4 |
| 18 | 5-3/16 | 2-1/2 | 23-1/4 | 6 |
| 6 | 5-3/16 | 2-1/2 | 11-1/4 | 3 |
| 24 | 5-3/16 | 2-1/2 | 29-1/4 | 6 |
| 2-4-1/2 (A) | ||||
| 12 | 6-7/8 | 3-1/4 | 19 | 4 |
| Size | Weight in kgper piece |
|---|---|
| M8 | 0.06 |
| M10 | 0.11 |
| M12 | 0.18 |
| M16 | 0.28 |
| M20 | 0.45 |
| M24 | 0.74 |
| M30 | 1.66 |
| M36 | 2.65 |
| M42 | 4.03 |
| M48 | 6.38 |
| M56 | 8.80 |
| M64 | 12.4 |
| M72 | 23.3 |
| M80 | 34.2 |
| M100 | 49.1 |
Testing Done On Swivel Eye Bolt
- Positive Material Identification Test
- Hardness Test
- Tensile Testing Machine
- IGC Test
| Size (D1) | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M42 | M48 | M56 | M64 |
| Pitch | 1.0 | 1.25 | 1.5 | 1.75 | 2.0 | 2.0 | 2.5 | 2.5 | 2.5 | 3.0 | 3.0 | 3.5 | 3.5 | 4.0 | 4.5 | 4.5 | 5.5 | 6.0 |
| D2 | 20 | 20 | 25 | 30 | 30 | 35 | 40 | 40 | 40 | 50 | 50 | 65 | 65 | 75 | 85 | 85 | 110 | 120 |
| D3 | 36 | 36 | 45 | 54 | 54 | 63 | 72 | 72 | 72 | 90 | 90 | 108 | 108 | 126 | 144 | 144 | 184 | 206 |
| D4 | 20 | 20 | 25 | 30 | 30 | 35 | 40 | 40 | 40 | 50 | 50 | 60 | 60 | 70 | 80 | 80 | 100 | 110 |
| H | 36 | 36 | 45 | 53 | 53 | 62 | 71 | 71 | 71 | 90 | 90 | 109 | 109 | 128 | 147 | 147 | 187 | 208 |
| Thread Length (L) |
|
|
|
|
|
|
|
|
|
|
45 | 45 | 55 | 55 | 65 | 70 | 78 | 90 |
What Is The Difference Between A Screw Eye And An Eye Bolt?
Screw eye bolts are essentially just a screw with an eye. Also commonly referred to as a lag eye, a screw eye bolt has an eye formed on one end and a threaded shank that tapers to a point. They are used primarily for light applications and are screwed into wood or lag anchors.
We are looking for importers in these locations
Tyra Gas Field Redevelopment, Denmark
Gorgon Gas Field Stage Ii, Australia
Johan Castberg Fpso Development, Norway
Hilton Steel © 2022 All Rights Reserved