What Is Galvanized Fasteners Used For?
Galvanized fasteners are versatile devices that can be easily connected and dismantled in the system. These fasteners are used in steel frame buildings, balconies, ladders, walkways, wind and solar industries, and in the automotive sector. They are also seen in the telecommunication sector, construction industry, and so on.
Is Galvanized Screws Rust Proof?
A galvanized screw has a coating of zinc that creates a protective layer. The layer of zinc prevents oxygen and water from reaching the steel underneath. When there is moisture or corrosive affluents, the zinc layer turns into zinc carbonate and prevents deterioration of steel.
5 Benefits Of Using Galvanized Bolts
A galvanized bolt possesses superior strength and can efficiently hold different equipment in place. These bolts have a tough coating that gives them good tolerance to mechanical damage. A galvanized bolt is hygienic and showcases good corrosion resistance properties, and has a clean surface. The versatile bolts allow ease of inspection. The versatile bolts are very durable and reliable on its functionality.
Difference Between Galvanized Eye Bolts And Galvanised Carriage Bolts
A galvanized eye bolt is designed with a loop at one end. These bolts are firmly used to attach a securing eye to the structure. Ropes and cables may be used to tie them together. A galvanized carriage bolt has a mushroom shaped head. These bolts are common in wood-to-wood fastening or metal-to-wood fastening. The square neck undercut allows it to keep them from turning while tightening them.
Table of Content
Galvanized Anchor Bolts Specifications
Sizes | M 6 - M 42 Inch Dia. |
Surface Treatment | Hot Deep Galvanizing |
Length | Upto 600 Milimeter |
Applications | Chemical / Pharmaceutical / Cement / Paper / Fertilizers /Sugar / Industries |
Materials | Mild Steel |
Colors | Grey |
Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
ASTM A 325 HDG BOLTS,FLAT WASHER C/W ANCO LOCK NUTS TO ASTM A 194 GRADE 2H GALVANIZED FINISH 1/2 X 2 1/2 LONG | ₹ 775/ NOS | $ 9.73 | € 9.65 | SAR 36.56 | RM 43.82 |
FLAT WASHER C/W ANCO LOCK NUTS TO ASTM A 194 GRADE 2H GALVANIZED FINISH 5/8 X 2 1/2 LONG | ₹ 1,218/ NOS | $ 15.30 | € 15.18 | SAR 57.49 | RM 68.91 |
BOLTS & NUTS 3/8 X55MM GALVANIZED | ₹ 410/ KGS | $ 5.15 | € 5.11 | SAR 19.35 | RM 23.20 |
HOT-DIP GALVANIZED ASTM A 153 S+2NH | ₹ 163/ KGS | $ 2.05 | € 2.03 | SAR 7.70 | RM 9.23 |
ASTM 194 GRADE 2H GALVANIZED FINISH 7/8X 4 LONG | ₹ 1,179/ NOS | $ 14.81 | € 14.69 | SAR 55.65 | RM 66.70 |
Galvanized Fasteners
Galvanized Bolts
Galvanized U Bolts
Galvanized Carriage Bolts
Galvanized Lag Bolts
Galvanized Anchor Bolts
Galvanized Wood Screws
Hot Dipped Galvanized Screws
Galvanized Ring Shank Nails
Galvanized Framing Nails
Galvanized Brad Nails
Galvanized Wedge Anchors
Hot Dipped Galvanized Roofing Nails
Galvanized Drywall Screws
Galvanised U Bolts
Galvanized Self Tapping Screws
Galvanized Lag Screws
Galvanised Eye Bolts
Galvanized Bolts And Nuts
Galvanized Hex Bolts
Square U Bolts Galvanized
Galvanized Concrete Anchors
Galvanized Bolts And Nuts Connection Types
SC | Slip critical connection. |
---|---|
X | Bearing-type connection with threads excluded from the shear plane. |
N | Bearing type connection with threads included in the shear plane. |
Galvanized Carriage Bolts Tolerance
Bolt Dia ines | Bolt Length Over 6 inch | Bolt Length Thru 6 inch |
---|---|---|
1-3/8 | -0.25 | -0.25 |
1-1/2 | -0.25 | -0.25 |
1 | -0.25 | -0.19 |
1-1/8 | -0.25 | -0.25 |
1/2 | -0.19 | -0.12 |
3/4 | -0.25 | -0.19 |
7/8 | -0.25 | -0.19 |
5/8 | -0.25 | -0.12 |
1-1/4 | -0.25 | -0.25 |
Bolt Diameters | Width Across Flats (F) | Body Diameters Maximum (D) | Height (H) | Corners Width (C) | Thread Length (T) | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Basic | Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | Maximum | Minimum | Basic | |
7/8 | 1-7/16 | 1.438 | 1.394 | 0.895 | 0.852 | 35/64 | 0.563 | 0.531 | 1.660 | 1.589 | 1.50 |
5/8 | 1-1/16 | 1.062 | 1.031 | 0.642 | 0.605 | 25/64 | 0.403 | 0.378 | 1.227 | 1.175 | 1.25 |
1 | 1-5/8 | 1.625 | 1.575 | 1.022 | 0.976 | 39/64 | 0.627 | 0.591 | 1.876 | 1.796 | 1.75 |
1-1/2 | 2-3/8 | 2.375 | 2.300 | 1.531 | 1.470 | 15/16 | 0.974 | 0.902 | 2.742 | 2.622 | 2.25 |
1/2 | 7/8 | 0.875 | 0.850 | 0.515 | 0.482 | 5/16 | 0.323 | 0.302 | 1.010 | 0.969 | 1.00 |
1-1/8 | 1-13/16 | 1.812 | 1.756 | 1.149 | 1.098 | 11/16 | 0.718 | 0.658 | 2.093 | 2.002 | 2.00 |
3/4 | 1-1/4 | 1.250 | 1.212 | 0.768 | 0.729 | 15/32 | 0.483 | 0.455 | 1.443 | 1.383 | 1.38 |
1-1/4 | 2 | 2.00 | 1.938 | 1.277 | 1.223 | 25/32 | 0.813 | 0.749 | 2.309 | 2.209 | 2.00 |
1-3/8 | 2-3/16 | 2.188 | 2.119 | 1.404 | 1.345 | 27/32 | 0.878 | 0.810 | 2.526 | 2.416 | 2.25 |
Characteristics Of Galvanized Lag Bolts
Hot Dip Galvanized Bolt Dia | C | F | D | H | T | |||||
---|---|---|---|---|---|---|---|---|---|---|
Width Across Corners | Width Across Flats | Body Dia | Height | Thread Length | ||||||
Maximum | Maximum | Maximum | Basic | Minimum | Basic | Basic | Minimum | Maximum | ||
7⁄8 | 1.589 | 1.660 | 1.438 | 17⁄16 | 1.394 | 0.895 | 0.563 | 35⁄64 | 0.531 | 1.50 |
3⁄4 | 1.383 | 1.443 | 1.250 | 11⁄4 | 1.212 | 0.768 | 0.483 | 15⁄32 | 0.455 | 1.38 |
1⁄2 | 0.969 | 1.010 | 0.875 | 7⁄8 | 0.850 | 0.515 | 0.323 | 5⁄16 | 0.302 | 1.00 |
5⁄8 | 1.175 | 1.227 | 1.062 | 11⁄16 | 1.031 | 0.642 | 0.403 | 25⁄64 | 0.378 | 1.25 |
11⁄2 | 2.622 | 2.742 | 2.375 | 23⁄8 | 2.300 | 1.531 | 0.974 | 15⁄16 | 0.902 | 2.25 |
13⁄8 | 2.416 | 2.526 | 2.188 | 23⁄16 | 2.119 | 1.404 | 0.878 | 27⁄32 | 0.810 | 2.25 |
1 | 1.796 | 1.876 | 1.625 | 15⁄8 | 1.575 | 1.022 | 0.627 | 39⁄64 | 0.591 | 1.75 |
11⁄4 | 2.209 | 2.309 | 2.00 | 2 | 1.938 | 1.277 | 0.813 | 25⁄32 | 0.749 | 2.00 |
11⁄8 | 2.002 | 2.093 | 1.812 | 113⁄16 | 1.756 | 1.149 | 0.718 | 11⁄16 | 0.658 | 2.00 |
Benefits Of Galvanized Wood Screws
F1852 (Twist-Off) and 120 ksi - A325 (Hexagon) | F2280 (Twist-Off) and 150 ksi - A490 (Hexagon) | |||||||
---|---|---|---|---|---|---|---|---|
Dia | Tensile mini lbf | Stress Area inch ² | Proof Load mini lbf | Proof Load mini lbf | Proof Load mini | Tensile maximum lbf | Tensile mini lbf | Proof Load mini lbf |
3/4 | 40,100 | 0.334 | 30,700 | 28,400 | 43,400 | 57,800 | 50,100 | 40,100 |
Above values based on | 120,000psi | 92,000psi | 85,000psi | 130,000psi | 173,000psi | 150,000psi | 120,000psi | |
1-1/8 | 91,600 | 0.763 | 70,250 | 64,900 | 99,200 | 132,000 | 114,450 | 91,600 |
1/2 | 17,050 | 0.142 | 13,050 | 12,050 | 18,500 | 24,600 | 21,300 | 17,050 |
7/8 | 55,450 | 0.462 | 42,500 | 39,250 | 60,100 | 79,950 | 69,300 | 55,450 |
1-1/4 | 116,300 | 0.969 | 89,200 | 82,400 | 126,000 | 167,650 | 145,350 | 116,300 |
5/8 | 27,100 | 0.226 | 20,800 | 19,200 | 29,400 | 39,100 | 33,900 | 27,100 |
1-1/2 | 168,600 | 1.105 | 129,300 | 119,500 | 182,600 | 243,100 | 210,750 | 168,600 |
1 | 72,700 | 0.606 | 55,700 | 51,500 | 78,800 | 104,850 | 90,900 | 72,700 |
1-3/8 | 138,600 | 1.155 | 106,300 | 98,200 | 150,200 | 199,850 | 173,250 | 138,600 |
Galvanised Eye Bolts Chemical Composition
Heat Analysis | 150ksi, % | 120ksi, % |
---|---|---|
Manganese | 0.60 min | 0.60 min |
Carbon | 0.30 – 0.48* | 0.30 – 0.52 |
Phosphorus | 0.035 max | 0.035 max |
Chromium | - | - |
Silicon | - | 0.15 – 0.30 |
Sulfur | 0.040 max | 0.040 max |
Copper | - | - |
Boron | 0.003 max | 0.003 max |
Nickel | - | - |
Molybdenum | - | - |
Galvanized Hex Bolts Temperature Rating
ASTM Grade | Minimum Tempering Temperature, Fahrenheit |
---|---|
A325 | 800° |
A449 | 800° |
A354 Grade BC | 800° |
A320 Grade L7 | No Requirement |
A193 Grade B7 | 1100° |
F1554 Grade 105 | 1100° |
Locate our Stockist and Distributors in neighborhood countries
Serov Plant, Russia
Kupe Gas Field, New Zealand
Vsp Rc4/5/rcdm Project, Offshore Vietnam
Hilton Steel © 2022 All Rights Reserved