Alloy 825 rod and flat bars standard sizes and weight per meter
Manufacturer of Nickel alloy 825 hex bar stock dimension 3 to 180 mm in India
Incoloy 825 round bar
Incoloy 825 bar
ASTM B425 uns n08825 hex bars
ASTM B425 UNS N08825 square bar in pickled, polished and sandblasted finish
Table of Content
Incoloy 825 round bar specifications
Incoloy 825 round bar size
- Diameter : 3 to 600 mm
- Length : 0.5 to 6 m
Alloy 825 hex bar size
- Diameter : 3 to 180 mm
- Length : 0.5 to 6 m
Inconel 825 flat bar size
- Width: 1.5 to 250 mm
- Thickness: 0.5 to 200 mm
- Length : 0.5 to 6 m
ASTM B425 UNS N08825 angle bar size
- 3*20*20 to 12*100*100
Nickel Alloy 825 square bar size
- Width : 2 to 200 mm
- Length : 0.5 to 6 m
Incoloy Alloy 825 rounds curie temperature
- <-320 °F / <-196 °C
Inconel Alloy 825 rectangular bar melting range
- 2500-2550 °F
- 1370-1400 °C
Alloy Incoloy 825 polished bar density
- 8.14 Mg/m3
- 0.294 lb/in.3
Werkstoff NR. 2.4858 bright bar ASTM Standard
- ASTM B425
- ASME SB425
Nicrofer 4241 cold drawn bar temperature range
- 1000 °F
- 540 °C
DIN 2.4858 cold finished round bar yield strength
- 241 MPa
Alloy 825 bright drawn round bar tensile strength
- 586 MPa
Nickelvac 825 hot rolled bars supply state
- Hardened strain
- Turned & rough polished
- Trailed center less ground & polished
- The strain Hardened
- Solenoid quality
- Peeled and polished
- Smooth Turned & Polished
- Annealed
825 Inconel annealed bar finish
- Peeled
- Polishing
- Hairline
- Bright
- Mirror
- Pickled
- Black
NCF 825 hexagonal bar surface
- Finished
- Cold Drawn
- Hairline
- Bright
- Sand Blasting
- Polished
- Hot Rolled Pickled
ASTM B425 alloy forged cold drawn bar 825 marking
- Material Grade
- Heat Number
- Nominal Size
- Schedule or Wall Thickness
- Manufacturer’s Name or Logo
- Specification
ASME SB425 N08825 N08825 shape
- Rectangular
- Round
- Hollow
- Hexagonal
- Square
WNR 2.4858 forged round bar documentation offered
- Copy of Invoice
- Packing List
- Country of Origin
- MTC, Grade etc.,
- Bill of Landing.
Alloy 825 round bar testing requirements
- Flaring Test
- Third party inspection test
- PMI test
- DT / NDT test
- Visual inspection test
- Chemical / Mechanical test
Alloy 825 bar packaging
- Wooden Boxes
- custom
- Special crates
- PE Fabric Bundles
- Wrapped in plastic
- Bundles
ASTM B425 UNS N08825 rod elongation
- 30 %
Inconel alloy 825Â flat bar hot working range
- 1600 to 2150°F
ASME SB425 EN 2.4858 square bar anneals temperature
- 1700 to 1800°F
Nicrofer 4241 rounds elastic modulus
- 193 GPa
DIN 2.4858 rectangle bar application
- Evaporators
- Sour gas components
- Ore processing
- Heat exchangers
- Sour gas components
- Chemical processing
- Food processing
Alloy 825 rectangular bar standards
- UNS No N08825
- BS NA 16
- En NiCr21Mo
- AFNOR NFE30C20DUM
- DIN 2.4858
- GOST ÐП703
- JIS NCF 825
International specifications
- BS 3072NA16
- BS 3073NA16
- DIN 17750
- ISO 6208
- VdTüV 432
Cutting process
- Slitting
- Shearing
- Water Jet Cutting
- Sawing
- Cut to Length
- Laser Cutting
Alloy 825 rod trade names
- Nicrofer 4221
- Superimphy 82
- Ferrochronin 825
Beniftis
- Good phosphoric resistance
- Good mechanical properties
- Best performance at high and low temperature
Thermal conductivity
- 11.1 W/m.K
Electrical Resistivity
- 1.13 μΩ.m
Processing
- Precision Rerolling
- Boring
- Edging
- Deburring
- Leveling
- Heat Treating
- Trepanning
Chemical composition
- Ni : 46 %
- C : 0.05 %
- Mn : 1 %
- Cu : 3 %
- Ti : 1.2 %
- S : 0.010 %
Type of Incoloy 825 round bar
- Werkstoff NR. 2.4858 shaft
- Incoloy 825 rod
- Alloy 825 flat bar
- Alloy Incoloy 825 hot rolled bars
- Inconel 825 bar stock
- Nicrofer 4241 billet
- Alloy 825 annealed bar
- DIN 2.4858 bright bar
- Nickelvac 825 cold drawn bar
- ASTM B425 UNS N08825 square bar
- WNR 2.4858 cold finished round bar
- EN 2.4858 forged round bar
- Nickel Alloy 825 hex bar
- Incoloy Alloy 825 round bar
- Nickelvac 825 bright drawn round bar
- Nickel 825 polished bar
- Inconel 2.4858 bloom
- 825 Inconel rounds
- Inconel Alloy 825 rectangular bar
Certification for ASME SB425 2.4858 billet
- Third Party Inspection Report
- MTC EN 10204 3.1 / 3.2
- Heat Treatment Charts
- HS Code Commercial Invoice
- Form A for Generalized System of Preferences (GSP)
- Raw Materials Certificate
- Surface roughness measurement
- Moisture testing report
- Fumigation Certificates
- Laboratory Test Certificate from Govt. Approved Lab
- DFARS compliant
Inconel alloy 825 bright and rectangular bar with NACE / MTC EN 10204 3.1
Incoloy 825 bar types
Incoloy 825 rod
- Hex Bar Size : 2-100mm A/F
- Square Bar Size : 4 to 100mm
Incoloy alloy 825 flat bar
- Round bar Size: Diameter 3-800mm
- Standards: ASTM B425
Inconel 825 round bar
- Tensile Strength : 586 Mpa (85 Ksi)
- Yield strength : 241 Mpa (35Ksi
Alloy 825 round bar
- Testing: PMI/IGC test/ Macro/micro test/ Hardness test
ASTM B425 825 alloy square bar
- Types: coil, foils, rolls, plain sheet, shim sheet, perforated sheet
Alloy 825 bar
- Hardness: Soft, hard, half hard, quarter, spring hard
Supplier of Werkstoff NR. 2.4858 polished bar with eadiographic and PMI test in Mumbai
ASTM B425 UNS N08825 hex bars chemical composition
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ti | |
|---|---|---|---|---|---|---|---|---|---|
| 825 | min. | – | – | – | 22.0 | – | 19.5 | 1.5 | 0.6 |
| max. | 0.05 | 1.0 | 0.5 | – | 0.015 | 23.5 | 3.0 | 1.2 | |
Incoloy 825 rod mechanical properties
| Grade | Yield Strength 0.2% Proof (MPa) minimum | Tensile Strength (MPa) minimum | Elongation (% in 50 milimeter) minimum |
|---|---|---|---|
| 825 | Psi – 32,000 , MPa -220 | Psi – 80,000 , MPa – 550 | 30 |
Nickel alloy 825 flat bar equivalent
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
|---|---|---|---|---|---|---|---|
| BS | En | No | AFNOR | ||||
| Incoloy 825 | N08825 | NA 16 | NiCr21Mo | 2.4858 | NFE30C20DUM | ÐП703 | NCF 825 |
View all other grades and their specialized manufacturers