What Are Fabrication Methods Used For Inconel 625 Round Bar
The Inconel 625 round bar is produced in 5 processes. Extraction of material followed by reinforcement and quenching. The bar is then self tempered and later atmospheric cooled. During the fabrication process after the material is shaped, it is cut or molded into different items.
Size Difference Between Inconel 625 Rod And Alloy 625 Bar
The most common shapes of Inconel 625 bars are also referred to as rods. Both these items have their unique design and geometry that distinguishes them in terms of size. Generally, rods are designed with a smaller section of 5.5 to 15 millimeters in diameter. Contrary, to this bars, are normally shaped in cut lengths.
Describe The Major Features Of Inconel 625 Flat Bar
The Inconel 625 flat bar is designed with a rectangular cross-section and can support different braces, ladders, etc. These bars have excellent strength and outstanding corrosion resistance properties across harsh environments. The flat bars have outstanding thermal fatigue strength and can handle temperatures from cryogenic to 1800 degrees F. The Inconel 625 flat bars have a tolerance to pitting and crevice corrosion in toxic environments. The bars can be readily welded following standard welding procedures.
Price Differnce Between Inconel 625 Hex Bar And Uns N06625 Square Bar In Kg
The price of a bar is based on its size, dimension, corrosion resistance, and other key features. The price of an Inconel 625 hex bar starts at $101.16 for a 1000mm length. The price for a square bar with the same length starts at $130.
Table of Content
Inconel 625 Round Bar Specifications
ASME and ASTM designation | ASTM B446 / ASTM SB446 |
Dimensions Schedule | ASME JIS, BS, EN, AISI, ASTM, DIN, |
Inventory Size Ranges | 5 millimeter To 500 millimeter |
Diameter in milimeter | 0.1millimeter to 100 millimeter |
Standard Length | 100 millimeter To 3000 millimeter Long or Above than it |
Finishes | BA Finish, Rough, Polished, Black, NO.4 Finish, Matt Finish, Turned, Bright, |
Tolerances | K11, K12 H8, H9, H11, H10, K10, H13K9, H12, or as per clients’ specification |
Forms | Ingot, Hex (A/F),Rectangle,Round,Forging, Square, Billet |
round bars Weight per meter | Diameter or Width (milimeter) |
Perimeter | Sectional Area | |||
---|---|---|---|---|---|---|
Round (kilogram) |
Square (kilogram) |
Round (centimeter) |
Square (centimeter) |
Round (centimeter²) |
Square (centimeter²) |
|
0.15 | 0.20 | 5.0 | 1.57 | 2.0 | 0.20 | 0.25 |
0.19 | 0.24 | 5.5 | 1.78 | 2.2 | 0.24 | 0.30 |
0.22 | 0.28 | 6.0 | 1.88 | 2.4 | 0.28 | 0.36 |
0.30 | 0.38 | 7.0 | 2.20 | 2.8 | 0.38 | 0.49 |
0.39 | 0.50 | 8.0 | 2.51 | 3.2 | 0.50 | 0.64 |
0.50 | 0.64 | 9.0 | 2.83 | 3.6 | 0.64 | 0.81 |
0.63 | 0.73 | 10 | 3.14 | 4.0 | 0.79 | 1.00 |
0.75 | 0.95 | 11 | 3.46 | 4.4 | 0.95 | 1.21 |
0.89 | 1.13 | 12 | 3.77 | 4.8 | 1.13 | 1.44 |
1.21 | 1.54 | 14 | 4.40 | 5.6 | 1.54 | 1.96 |
1.58 | 2.01 | 16 | 5.03 | 6.4 | 2.01 | 2.56 |
2.00 | 2.54 | 18 | 5.65 | 7.2 | 2.54 | 3.24 |
2.47 | 3.14 | 20 | 6.28 | 8.0 | 3.14 | 4.00 |
2.98 | 3.80 | 22 | 6.91 | 8.8 | 3.80 | 4.84 |
3.85 | 4.91 | 25 | 7.85 | 10.0 | 4.91 | 6.25 |
4.83 | 6.15 | 28 | 8.80 | 11.2 | 6.16 | 7.84 |
6.31 | 8.04 | 32 | 10.05 | 12.8 | 8.04 | 10.24 |
7.99 | 10.17 | 36 | 11.31 | 14.4 | 10.18 | 12.96 |
9.86 | 12.56 | 40 | 12.57 | 16.0 | 12.57 | 16.00 |
12.49 | 15.90 | 45 | 14.14 | 18.0 | 15.90 | 20.25 |
15.41 | 19.62 | 50 | 15.71 | 20.0 | 19.64 | 25.00 |
19.34 | 24.62 | 56 | 17.59 | 22.4 | 24.63 | 31.36 |
24.47 | 31.16 | 63 | 19.79 | 25.2 | 31.17 | 36.69 |
31.08 | 39.57 | 71 | 22.31 | 28.4 | 39.59 | 50.41 |
39.46 | 50.24 | 80 | 25.13 | 32.0 | 50.27 | 64.00 |
Description | Manufacture Method | Diameter | Shape | Specification |
---|---|---|---|---|
ALLOY 625 AMS 5666 HF ROD 1.000 DIA | HOT FINISHED | 1.0000 | ROD/BARS ROUND | AMS5666 J ASME SB446 |
ALLOY 625 AMS5666 SABRE | 1.5000 | AMS5666 J PWA 300 | ||
ALLOY 625 LCS AMS 5666 .500 DIA | 0.5000 | AMS5666 CPW-A-5666 | ||
ALLOY 625 HF ROD RG/RT AN .500 DIA | 0.5000 | AMS5666 J ASME SB446 | ||
ALLOY 625 AMS5666 SABRE | 3.5000 | AMS5666 J PWA 300 | ||
ALLOY 625 HF ROD RG/RT AN .750 DIA | 0.7500 | AMS5666 J ASME SB446 | ||
ALLOY 625 AMS5666 SABRE | 1.7500 | AMS5666 J PWA 300 |
Inconel 625 Round Bar
Inconel 625 Rod
Inconel 625 Bar
Alloy 625 Round Bar
Alloy 625 Bar
Inconel 625 Flat Bar
Inconel 625 Square Bar
Inconel 625 Hex Bar
Alloy 625 Rod
ASTM B 446 Nickel Alloy UNS N06625 Rod
DIN 2.4856 Bright Bar
NCF 625 Bright Bar
Weight per Foot of hex bars | Weight per Inch | Sizes in Inches |
---|---|---|
0.0180 | 2.160 | 1/4 |
0.0104 | 1.248 | 3/16 |
0.0600 | 4.920 | 3/8 |
0.0290 | 3.480 | 5/16 |
0.0740 | 8.880 | 1/2 |
0.0560 | 6.72 | 7/16 |
1.150 | 13.80 | 5/8 |
0.0930 | 11.16 | 9/16 |
1.660 | 19.92 | 3/4 |
1.390 | 16.68 | 11/16 |
2.300 | 27.60 | 7/8 |
2.600 | 31.20 | 15/16 |
1.950 | 23.40 | 13/16 |
3.30 | 39.60 | 1-1/16 |
2.90 | 34.80 | 1 |
4.600 | 55.20 | 1-1/4 |
3.700 | 44.40 | 1-1/8 |
5.600 | 67.20 | 1-3/8 |
5.100 | 61.20 | 1-5/16 |
6.600 | 79.20 | 1-1/2 |
6.100 | 73.20 | 1-7/16 |
26.53 | 318.36 | 3 |
9.030 | 108.36 | 1-3/4 |
7.800 | 93.60 | 1-5/8 |
18.42 | 221.04 | 2-1/2 |
11.80 | 141.60 | 2 |
10.0400 | 124.80 | 1-7/8 |
16.920 | 203.04 | 2-3/8 |
14.920 | 179.04 | 2-1/4 |
Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
625-ROUND BARS -16MM | ₹ 3,136/ KGS | $ 39.39 | € 38.66 | SAR 148.03 | RM 175.64 |
ROUND BARS DIA.25MM DIA SB 446 UNS N06625 | ₹ 11,151/ MTR | $ 140.06 | € 137.47 | SAR 526.35 | RM 624.53 |
ROUND BARS/INCONEL 625,AMS 5666G 0.750 DIA X 144 RL | ₹ 31,113/ NOS | $ 390.79 | € 383.57 | SAR 1468.60 | RM 1742.53 |
ROUND BARS DIA DIA.32MM DIA SB 446 UNS N06625 | ₹ 15,745/ MTR | $ 197.76 | € 194.11 | SAR 743.19 | RM 881.81 |
Inconel 625 Flat Bar Chemical Composition
Ni | Fe | C | Mn | Si | Cr2 | Mo | Co | Al | Ti | Nb + Ta | P | S |
58.0 minimum | 5.0 maximum | 0.10 maximum | 0.50 maximum | 0.50 maximum | 20.0-23.0 | 8.0-10.0 | 1.0 maximum | 0.40 maximum | 0.40 maximum | 3.15–4.15 | 0.015 maximum | 0.015 maximum |
Inconel 625 Square Bar Mechanical Properties
Density | 8.4 g/cm3 |
Melting Point | 1350 °C (2460 °F) |
Tensile Strength | Psi – 1,35,000 , MPa – 930 |
Yield Strength (0.2%Offset) | Psi – 75,000 , MPa – 517 |
Elongation | 42.5 % |
Equivalent Of Inconel 625 Hex Bar
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
WERKSTOFF NR. 2.4856 Hex Bars | 625 Inconel Threaded Bars |
ASTM B166 625 Alloy Hex Bars Polished | Alloy 625 Hexagonal Bars |
UNS N06625 Round Bars | Inconel 625 Din 2.4856 Flat Bars |
alloy 625 Square Bars Polished | Inconel UNS N06625 Bright Bars Hot Rolled |
ASTM B166 625 Round Bars | Inconel 625 Flat Bars |
2.4856 Alloy 625 Hex Bars Bright | 625 Alloy Hollow Bars |
ASTM B166 625 Alloy Rectangular Bars | WERKSTOFF NR. 2.4856 Threaded Bars Black |
625 Alloy Rounds | 625 Flat Bars Bright |
Alloy 625 Bright Bars | 625 Flat Bars Polished |
625 Inconel Rods | UNS N06625 Inconel Flat Bars Cold Drawn |
625 Alloy Square Bars Cold Drawn | alloy 625 Bright Bars material |
alloy 625 Bars | Alloy 625 Flat Bars Black |
Alloy 625 Hex Bars Annealed | Inconel WERKSTOFF NR. 2.4856 Cold Drawn Round Bars |
Alloy 625 Rod | UNS N06625 Flat Bars Annealed |
625 Alloy Forged Bars | Nickel Alloy 625 Polished Bars |
Get the Local reference about material quality in your place of Living
Al Sila Port- Abu Dhabi
Kuwait National Petroleum Company- Kuwait
Neste Refinery Expansion- Singapore
Hilton Steel © 2022 All Rights Reserved