Alloy 625 Rod and Inconel 625 hex bar manufacturer in India
Get the quick quote from a genuine stockist of ASTM B446 UNS N06625 flat bar and Inconel 625 rod in Mumbai
Inconel 625 round bar
Alloy 625 bar
Inconel 625 rod
Inconel 625 bar and welding/ tig rod available cut to size from 500mm upto a max 3000mm Long
Table of Content
Specifications of Inconel 625 round bar
| Sizes | Condition | Hardness | Tolerances |
|---|---|---|---|
| 0.125 to 12 inches | cold drawn, annealed, turned etc |
|
H12, H13, H11, K12, K11, K10, H9, K9, H10, H8 |
| Specification | Length | Packing | Form |
| ASME SB 446/ ASTM B 446 | 2 to 6m |
|
Round, Hex, Square, Rectangular etc |
Alloy 625 round bar and Nickel alloy 625 square bars stock available in bright annealed finish in Mumbai
Inconel 625 bar types
Inconel 625 welding rod
- Specification: AMS 5666, ASTM B564/ B446
- Temperature: cryogenic to 1800°F (982°C)
Alloy 625 round bar
- Thickness: 3.0 to 12.0mm
- Hex Bar Size : 2-100mm A/F
Inconel 625 tig rod
- Square Bar Size : 4 to 100mm
- Round bar Size: Diameter 3-800mm
Inconel 625 bar
- Consition: Hardened & tempered, annealed
- Tensile strength: 13.3 KSI (13,300 psi)
Inconel 625 hex bar
- Surface : Cold Drawn/ Hot Rolled Pickled/ Sand Blasting Finished/ Bright/ Hairline, Polished
ASTM B446 UNS N06625 flat bar
- Application : Chemical Processing, Expansion Joints, Heat Exchangers
Alloy 625 bar and DIN 2.4856 shaft with UT test
Nickel alloy 625 rod chemical composition
| Grade | C | Mn | Si | Fe | S | Cr2 | Al-Ti | Ni | |
|---|---|---|---|---|---|---|---|---|---|
| 625 | min. | – | – | – | – | – | 20.0 | – | 58.0 |
| max. | 0.10 | 0.50 | 0.50 | 5.0 | 0.015 | 23.0 | 0.40 | – | |
ASTM B446 UNS N06625 hex bars mechanical properties
| Grade | Strength of Tensile (MPa) minimum | Elongation (% in 50mm) minimum | Strength of Yield 0.2% Proof (MPa) minimum | Pipe Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) maximum | Brinell (HB) maximum | ||||
| 625 | Psi – 1,35,000 , MPa -930 | 42.5 | Psi – 75,000 , MPa – 517 | – | – |
Equivalent grades of Alloy 625 bar
| Grade | Euronorm | GOST | UNS No | Old British | Japanese JIS | ||
|---|---|---|---|---|---|---|---|
| No | AFNOR | BS | En | ||||
| Alloy 625 | 2.4856 | NC22DNB4M | ХН75МБТЮ | N06625 | NA 21 | NiCr22Mo9Nb | NCF 625 |
Physical properties of DIN 2.4856 flat bars
| Density | 0.305 | lb/cu in |
|---|---|---|
| 8.44 | gram/cc | |
| Specific Heat | Btu/lb°F (J/kg°C) | |
| 0.096(402) | 0°F (-18°C) | |
| 0.098(410) | 70°F (21°) | |
| 0.102(427) | 200°F (93°C) | |
| 0.109(456) | 400°F (204°C) | |
| 0.115(481) | 600°F (316°C) | |
| 0.122(511) | 800°F (427°C) | |
| 0.128(536) | 1000°F (538°C) | |
| 0.135(565) | 1200°F (649°C) | |
| 0.141(590) | 1400°F (760°C) | |
| 0.148(620) | 1600°F (871°C) | |
| 0.154(645) | 1800°F (982°C) | |
| 0.160(670) | 2000°F (1093°C) | |
| Melting Range | 2350 | °F |
| 1290 | °C | |
| Curie Temperature | <-320 | °F |
| -196 | °C | |
| Permeability | 1.0006 | at 200 Oersted (15.9 kA/m) |
Thermal properties of Alloy 625 round bar
| Temp Range | Thermal Conductivity 2 3 | Thermal Expansion1 · 10-6 | |||
|---|---|---|---|---|---|
| °C | °F | W/m·K | Btu/(hr/ft²/in/°F) | /°C | /°F |
| -157 | -250 | 7.3 | 4.2 | – | – |
| -129 | -200 | 7.4 | 4.3 | – | – |
| -73 | -100 | 8.3 | 4.8 | – | – |
| -18 | 0 | 9.2 | 5.3 | – | – |
| 21 | 70 | 9.9 | 5.7 | – | – |
| 38 | 100 | 10.0 | 5.8 | – | – |
| 93 | 200 | 10.7 | 6.3 | 12.8 | 7.1 |
| 204 | 400 | 12.6 | 7.3 | 13.1 | 7.3 |
| 316 | 600 | 14.2 | 8.2 | 13.3 | 7.4 |
| 427 | 800 | 15.7 | 9.1 | 13.7 | 7.6 |
| 538 | 1000 | 17.5 | 10.1 | 14.0 | 7.8 |
| 649 | 1200 | 19.0 | 11.0 | 14.8 | 8.2 |
| 760 | 1400 | 20.8 | 12.0 | 15.3 | 8.5 |
| 871 | 1600 | 22.8 | 13.2 | 15.8 | 8.8 |
| 927 | 1700 | – | – | 16.2 | 9.0 |
| 982 | 1800 | 25.3 | 14.6 | – | – |
Nickel alloy 625 square bars tolerance
| * CG – Centerless Ground
HR RT – Hot Rolled Rough Turned |
5/16 CG .5725 CG 5/8 CG 1/2 CG 9/16 CG .510 CG 7/16 CG 11/16 CG .635 CG 3/8 CG .385 CG .3225 CG .260 CG .4475 CG 1/4 CG |
.760 CG 2 CG 3/4 CG 1-1/8 CG 7/8 CG .885 CG 1-3/8 CG 1.010 CG 1.135 CG 1 CG 1-1/4 CG 1-3/4 CG 1.260 CG 1-5/8 CG 1-1/2 CG |
3-1/2 CG 3 CG 2-1/2 CG 4 HR RT 4-1/2 HR RT 2-3/4 CG 2-1/4 CG 6 HR RT 5-1/2 HR RT 2-3/8 CG 3-3/4 HR RT 2-1/8 CG 2-5/8 CG 8 HR RT 5 HR RT |
|---|
Check other grades for best price