Inconel 718 Plate

Buy UNS N07718 Strips and Alloy 718 Plate As Per International Standard At Low Price In India

Must know Inconel 718 Plate Hardness, Grade And Properties

Inconel 718 plate is a super alloy nickel-based alloy. These plates have excellent corrosion resistance properties and are highly tolerant to oxidative media. The Inconel 718 plate has good strength and provides stability to different items. These plates can handle different pressures and temperatures up to 700 degrees C. The Inconel 718 plates have good malleability and showcase exceptional welding and machining quality. The versatile plates have excellent mechanical and physical properties. The Inconel 718 plate has a hardness between 32 to 40 HRC. This makes them among the most difficult to machine due to their special properties.

Compare Price Difference Of Alloy 718 Sheet In India And Usa, Uk, Malaysia

The price of alloy 718 sheets in India is available at $46 per kg. The price of the same sheet in the USA starts at $65 per kg with the price in the UK starting at $54. The price point of the Alloy 718 sheet in Malaysia starts at $51 per kg.

What Are Most Common Inconel 718 Strip Sizes?

The Inconel 718 strips most commonly come in thicknesses between 0.2mm to 0.5mm. This gives them protection against corrosive affluents and heat treatment procedures.

What Is The Difference In Thickness Between Inconel 718 Coil And Alloy 718 Foil

Inconel 718 coil is a grade that is coiled soon after the rolling stage. These coils are generally designed in thickness ranging between 1.2mm to 20mm. Alloy 718 foil is the thinnest metal grade in this range. The foils are available in thicknesses of less than 0.2mm.

Inconel 718 Sheet Suppliers In India , Must View DIN 2.4668 Coil and AMS 5596 Shim Sheet Dimensions, Size And Weight Chart

Table of Content

Specification Of Inconel 718 Sheet
Inconel 718 Plate Price
Alloy 718 Plate Types
Chemical Composition Of Alloy 718 Sheet
Inconel 718 Coil Mechanical Properties
Uses Of Inconel 718 Foil
Inconel 718 Strip Equivalent
Dimension Chart Of AMS 5596 Shim Sheet
Inconel 718 Chequered Plate Tolerance Chart

Specification Of Inconel 718 Sheet

Specifications	ASTM B 670 / ASME SB 670
Forms	Foils, Coils, Rolls, Shim Sheet, Plain Sheet, Strip, Blank (Circle), Flats, Ring (Flange)
Finishes	BA NO(8), Hot rolled plate , Cold rolled sheet , 2B, 2D, SATIN
Hardness	Spring Hard, Soft, Hard,Half Hard, Quarter Hard,etc.
Sizes	1220 x 2440 , 1000 x 2000 ,2000 x 2000 , 1500 x 3000 , 2000 x 4000
Thickness	0.1 to 12 thickness

View Latest Price & Ready Sizes Of Alloy 718 Sheet and Inconel 718 Foil Ex Mumbai

Inconel 718 Plate Price

Description	Price in India	Price in USD	Price in Euro	Price in Saudi Riyal	Price in Ringgit
INCONEL 718 SHEET .024 THICK 120X36	₹ 7,507/ KGS	$ 94.26	€ 91.19	SAR 354.21	RM 418.99
COLD FORMED INCONEL 718 SHEET(718 ANN. 0.064-0.071X36X120AMS5596)	₹ 3,214/ KGS	$ 40.36	€ 39.05	SAR 151.67	RM 179.40
COLD ROLLED ANNEALED - INCONEL 718 SHEETS (.177/.197 X 48 X 120)	₹ 3,030/ KGS	$ 38.05	€ 36.81	SAR 142.99	RM 169.13
SHEET 718 INCONEL PER AMS 5596 K , 0.510/0.560 X 48 X 22	₹ 3,386/ KGS	$ 42.52	€ 41.14	SAR 159.78	RM 189.00
UNS-N-07718 SIZE (.0115/0.013) X 36 X 120 6 Sheets	₹ 7,471/ KGS	$ 93.81	€ 90.76	SAR 352.52	RM 416.99

Alloy 718 Plate Types

Alloy 718 Sheet

Alloy 718 Plate

718 Inconel Sheet

Inconel 718 Coil

Inconel 718 Foil

Inconel 718 Strip

Inconel 718 Plate

AMS 5596 Shim Sheet

Inconel 718 Sheet

Alloy 718 Clad Plate

Inconel 718 Chequered Plate

Alloy 718 Perforated Sheet

DIN 2.4668 Rolling Sheet

DIN 2.4668 Sheet Benefits

Call For Small Piece Of 5mm Thick Cold Rolled Alloy 718 Clad Plate and 2.4668 Hot and Cold Rolled Sheet To Test Before Buying

Chemical Composition Of Alloy 718 Sheet

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 718	0.08 max	0.35 max	0.35 max	0.015max	0.30 max	–	50.00 – 55.00	17.00 – 21.00

Inconel 718 Coil Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 718	8.2 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa – 930	Psi – 75,000 , MPa – 482	45 %

Uses Of Inconel 718 Foil

Tooling
Pumps and valves
Cryogenic tanks
Gas turbine engine parts
Springs, fasteners
Liquid fuel rocket motor components

Buy Alloy 718 Perforated/ Rolling Sheet and Inconel 718 Chequered Plate, Check Equivalent, Hardness And Chemical Composition Here

Inconel 718 Strip Equivalent

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 718	2.4668	N07718	–	–	–	–	–

Inconel 718 Sheet Plasma Cutting

Dimension Chart Of AMS 5596 Shim Sheet

Dimension (mm)	KG P/M2
0.5 X 1000 X 2000	4.5
0.7 X 1219 X 3048	6.3
0.9 X 1219 X 3048	8.1
1.2 X 1219 X 3048	10.8
1.6 X 1200 X 3048	14.4
2.0 X 1219 X 3048	18.0
3 X 1200 X 3000	27.0
3.18 X VARIOUS ANN	28.6

Inconel 718 Chequered Plate Tolerance Chart

Thickness	Density
0.078 inches1.9812 mm	0.296 lbs/in³8.19 g/cm³
0.093 inches2.3622 mm	0.296 lbs/in³8.19 g/cm³
0.104 inches2.6416 mm	0.296 lbs/in³8.19 g/cm³
0.125 inches3.1750 mm	0.296 lbs/in³8.19 g/cm³
0.134 inches3.4036 mm	0.296 lbs/in³8.19 g/cm³

Werkstoff No 2.4668 Sheet thickness

Inconel 718 SURFACE FINISH	THICKNESS (MM)	WIDTH (MM)
2D - pickled, Cold rolled, heat treated	0.4 to 6.35	Maxi. 1524
Polished, brushed	0.5 to 4.0	Maxi. 1524
2B - pickled, Cold rolled, heat treated, skin passed	0.25 to 8.0	Maxi. 2032
2R - bright annealed, Cold rolled	0.25 to 3.5	Maxi. 1524
2E - heat treated, mechanically descaled, Cold rolled	0.4 to 8.0	Maxi. 2032
2H - Work hardened	0.4 to 6.35	Maxi. 1524

ASTM B670 UNS N07718 Sheet thickness tolerances

Width w (mm)	2.5<t <4.5	6.0<t <8.0	8.0<t <10.0	4.5<t <6.0	20.0<t <25.0	12.5<t <16.0	10.0<t <12.5	16.0<t <20.0	25.0<t <30.0	30<t <40.0
w < 1200	0.20	0.30	0.32	0.23	0.80	0.80	0.35	0.80	1.0	1.4
1800< w <2100	0.20	0.36	0.40	0.30	0.90	0.80	0.45	0.80	1.1	1.5
2100< w <2400		0.80	0.80	0.80	1.0	0.80	0.80	0.90	1.1	1.5
1200< w <1500	0.20	0.30	0.35	0.25	0.90	0.80	0.38	0.80	1.0	1.4
1500< w <1800	0.20	0.32	0.38	0.28	0.90	0.80	0.40	0.80	1.1	1.5
2400< w <2700		0.80	0.80	0.80	1.1	0.90	0.80	1.0	1.3	1.7
2700< w <3000		0.90	1.0	0.80	1.3	1.0	1.0	1.1	1.4	1.8