Where do we use Inconel 600 Flanges?
The Inconel 600 flanges are commonly seen in the chemical industry and aerospace sectors. These flanges are also used in the heat treating industry, pulp and paper processing, nuclear engineering, and gas turbine components. They are part of chemical processing equipment, gas turbine components, electronic parts, and food processing systems.
What are the common grades of Inconel Flanges?
Inconel flanges are high performance nickel and chromium alloys. The Inconel flanges are commonly available in grades of 600, 617, 625, 690, 718, and X-750.
Benefits of Alloy 600 Blind Flange
Alloy 600 Blind flange is a solid solution of strengthened alloys that have superior resistance to corrosive affluents. These blind flanges work well in cryogenic as well as elevated temperatures in the range of up to 2000 degrees F. The non-magnetic flanges are easy to install and help terminate the flow of media efficiently. These flanges can easily connect the ends of the pipeline and can be readily dismantled. Alloy 600 flanges work in different organic and inorganic compounds, giving them excellent resistance to chloride ion stress corrosion cracking. These flanges have excellent mechanical properties and have a low rate of attack from chlorine and hydrogen chlorides. The versatile blind flanges work well in alkaline solutions and in sulfur compounds. The high strength flanges have good weldability across a different range of temperatures.
How are Alloy 600 Flanges tested?
The Alloy 600 flanges are manufactured following a strict process. After this, they are subjected to a vigorous testing routine to give the best product to the public. The flanges are put through hydrostatic, non-destructive, distractive, and metallurgical tests. The flanges are also subjected to visual and dimension inspection to check for any surface or dimensional defects. Once it has passed these tests, the flange is marked with the correct specifications.
Price Differnce Between ANSI B16.5 Alloy 600 Slip On Flanges and ASTM B564 UNS N06600 Weld Neck Flanges
The price of Alloy 600 slip on and weld neck flanges are priced based on their size, thickness, and customizations. The price of the ASTM B564 UNS NO6600 weld neck flange is between $2.92 to $3.53 per piece. The ANSI B16.5 Alloy slip on flange is available at prices between $1.2 to $1.98 per piece.
Table of Content
Specification Chart Of Alloy 600 Blind Flange
Standards | JISB2220, GOST Flange, BS1560-3.1, API7S-15, API7S-43, API605,BS, EN1092, BS4504, BS 10,DIN, EN-1092, ANSI, DIN, ASME, MSS S44, ASME/ANSI B16.5, ISO70051, ASME/ANSI 16.36/B16.5/ 16.47B/16.47A, B16.47 Series B & A, B16.48, EN |
---|---|
DIN | PN40, PN25, 6Bar, PN10, PN16, 40Bar, 16Bar, PN6 25Bar, 10Bar, / PN64, |
JIS | 20 K, 16 K, 5K, 63 K, 40 K, 10 K, 30 K, |
UNI | 6Bar 40Bar 16Bar 10Bar 25Bar |
Production techniques | Heat treated , Forged, and machined |
Shapes and Types we produce | Ring Type Joint, Large Male-Female, Flat Face , Small Male-Female ,Small Tongue, Raised Face , Groove, Large Tongue & Groove, Lap-Joint Face |
EN | 40Bar 6Bar 16Bar 25Bar 10Bar |
Pressure Rating ANSI | Class 150, Class 1500, Class 900, Class 300, Class 2500, Class 600, |
Types | Screwed, Threaded, Forged, Plate |
Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
BLIND FLANGE 2 150# RF ASME B16.5 50-150RF-INCONEL 601 | ₹ 18,583/ KGS | $ 232.68 | € 233.41 | SAR 874.21 | RM 1041.01 |
INCONEL 601 FLANGE WNRF, SIZE 10 X SCH40S, X300# | ₹ 2,105/ KGS | $ 26.36 | € 26.44 | SAR 99.04 | RM 117.93 |
INCONEL 601 FLANGES 113/16API 10000 # RTJ | ₹ 44,659/ PCS | $ 559.17 | € 560.93 | SAR 2100.88 | RM 2501.73 |
NICKEL ALLOY INC.600.2-BL-600GR-RJ FLANGES | ₹ 24,128/ PCS | $ 302.10 | € 303.05 | SAR 1135.03 | RM 1351.60 |
ALLOY 600 B564 6 600# SPECTACLE BLIND FLANGE | ₹ 4,850/ KGS | $ 60.73 | € 60.92 | SAR 228.17 | RM 271.71 |
NICKEL ALLOY FLANGE GRADE INC.600 16 BL 1500 RJ | ₹ 1,124,768/ PCS | $ 14083.10 | € 14127.39 | SAR 52912.08 | RM 63007.79 |
Inconel Flanges
Inconel 600 Flanges
Alloy 600 Blind Flange
Alloy 600 Flanges
Inconel 601 Flanges
ASTM B564 UNS N06600 Weld Neck Flanges
ANSI B16.5 Alloy 600 Slip On Flanges
Inconel 600 Socket Weld Flange
Din 2.4816 Spectacle Blind Flange
Alloy 600 Pipe Flanges
Inconel 600 Plate Flanges
ASME SB564 UNS N06600 Orifice Flange
Inconel 601 Flanges Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015 max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 0.015 max | 1.00 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Inconel 600 Weld Neck Flanges Mechanical Properties
Grade | Melting Point | Density | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
Inconel 600 | 1413 °C (2580 °F) | 8.47 g/cm3 | Psi – 45,000 , MPa – 310 | Psi – 95,000 , MPa – 655 | 40 % |
Inconel 601 | 1411 °C (2571 °F) | 8.1 g/cm3 | Psi – 30,000 , MPa – 205 | Psi – 80,000 , MPa – 550 | 30 % |
ANSI B16.5 Alloy 600 Slip On Flanges Equivalent
STANDARD | JIS | UNS | BS | WERKSTOFF NR. | GOST | EN | AFNOR |
Inconel 600 | NCF 600 | N06600 | NA 13 | 2.4816 | МНЖМц 28-2,5-1,5 | NiCr15Fe | NC15FE11M |
Inconel 601 | NCF 601 | N06601 | NA 49 | 2.4851 | XH60BT | NiCr23Fe | NC23FeA |
Alloy 600 Tapped Blind Flange With Threaded Hole
Tapped Blind Of Size | Threaded Hole |
---|---|
3/8" | 10.5 |
1/2" | 13.5 |
3/4" | 14.0 |
1" | 17.5 |
1-1/4" | 18.1 |
1-1/2" | 18.3 |
2" | 19.4 |
Gasket For Alloy 600 Plate Flanges
(Normal Size Of Steel Pipes) In Inch | (I.D.) Inner Daimeter Gasket |
(O.D.) Outer Daimeter Gasket | ||||
---|---|---|---|---|---|---|
Class 150#/ LB | Class 300#/ LB | Class 400#/ LB | Class 600#/ LB | Class 900#/ LB | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
Inconel 600 Socket Weld Flange Dimension
NPS Of SWRF | Outer Diameter | Diameter of RF | Minimum Thickness | Hub Diameter | Through Hub Length | Bore Diameter | Socket Depth | Bolt Circle Diameter | Bolt Holes Diameter | Flanges Bolt Number | Weight In Kilogram | - |
(NPS) | (O) | (R) | (tf) | (X) | (Y) | (B1) | (B2) | (D) | (W) | (I) | (n) | (-) |
1/2 | 90 | 34.9 | 9.6 | 30 | 14 | 22.2 | 15.8 | 10 | 60.3 | 15.9 | 4 | 0.42 |
3/4 | 100 | 42.9 | 11.2 | 38 | 14 | 27.7 | 20.9 | 11 | 69.9 | 15.9 | 4 | 0.60 |
1 | 110 | 50.8 | 12.7 | 49 | 16 | 34.5 | 26.6 | 13 | 79.4 | 15.9 | 4 | 0.83 |
1 1/4 | 115 | 63.5 | 14.3 | 59 | 19 | 43.2 | 35.1 | 14 | 88.9 | 15.9 | 4 | 1.01 |
1 1/2 | 125 | 73.0 | 15.9 | 65 | 21 | 49.5 | 40.9 | 16 | 98.4 | 15.9 | 4 | 1.32 |
2 | 150 | 92.1 | 17.5 | 78 | 24 | 61.9 | 52.5 | 17 | 120.7 | 19.1 | 4 | 2.07 |
2 1/2 | 180 | 104.8 | 20.7 | 90 | 27 | 74.6 | 62.7 | 19 | 139.7 | 19.1 | 4 | 3.51 |
3 | 190 | 127.0 | 22.3 | 108 | 29 | 90.7 | 77.9 | 21 | 152.4 | 19.1 | 4 | 4.01 |
Weight Chart Of DIN 2.4816 Spectacle Blind Flange
Pressure Class | Nominal Size Of Pipe (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (LOOSE) | Blind (BLRF) | Weld Neck (WNRF) |
---|---|---|---|---|---|---|---|
Class 150 Flanges | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
1 | 2 | 2 | 2 | 2 | 2 | 3 | |
1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
2 | 5 | 5 | 5 | 5 | 5 | 6 | |
2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
5 | 15 | 15 | 15 | 15 | 20 | 21 | |
6 | 19 | 19 | 19 | 19 | 27 | 26 | |
8 | 30 | 30 | 30 | 30 | 47 | 42 | |
10 | 43 | 43 | 43 | 43 | 70 | 54 | |
12 | 64 | 64 | 64 | 64 | 123 | 88 | |
14 | 90 | 90 | 90 | 105 | 140 | 114 | |
16 | 106 | 98 | 98 | 140 | 180 | 140 | |
18 | 130 | 130 | 130 | 160 | 220 | 165 | |
20 | 165 | 165 | 165 | 195 | 285 | 197 | |
22 | 185 | 185 | 185 | 245 | 355 | 225 | |
24 | 220 | 220 | 220 | 275 | 430 | 268 |
Check our reference of material in these countries
Snefrid, Norway
Bapco Modernization, Bahrain
Zubair Oilfield, Iraq
Hilton Steel © 2022 All Rights Reserved