Alloy 400 Elbow and Monel Pipe Fittings Manufacturers In India
Why Choose Monel 400 Pipe Fittings For Marine And Offshore Environments Application?
Monel 400 pipe fittings are solid solution hardened alloys. These fittings are designed with a superior composition of nickel and copper. This allows it to have excellent resistance to corrosive and oxidative affluents that are common in marine environments. The fittings are easy to align and can connect efficiently with different pipping equipment in the industry. These pipe fittings are immune to chloride stress corrosion cracking and can work efficiently with seawater. They showcase enhanced resistance to rapidly flowing seawater and are tolerant against alkalis. The alloy 400 pipe fittings also show tolerance to neutral and alkaline salts, alongside hydrochloric and sulfuric acids. The Monel 400 fittings are also resistant to stress corrosion cracking which is common in marine bodies. They retain excellent mechanical properties in sub-zero as well as temperatures up to 1020 degrees F.
Cost Difference of Alloy 400 Elbow in india and Singapore
The cost of an Alloy 400 elbow is dependent on the size, thickness, bending radius, and other specifications of the fitting. The price of this elbow in India starts at $15 to $20 per piece. The price of a similar elbow in Singapore will cost higher ranging between $25.67 to $28.22 per piece.
Difference Types of Monel Pipe Fittings
Monel is a superalloy pipe fitting that is designed to different specifications. These fittings are generally available in the form of elbows, tees, reducers, unions, couplings, crosses, caps, nipples, and plugs. They can be also availed in the form of bushings, adapters, outlets, valves, and so on.
Size Difference Between ASTM F467 UNS N04400 Equal Tee and Unequal Tee
The ASTM F467 UNS N04400 tees are piping fittings that allow flow to take place across three channels. They are available in standard equal and unequal sizes. In the equal tee, the size of all the openings is the same. In the unequal tee, the size of one of the openings is small. The unequal opening can be of different sizes and can be customized as per customer requirements.
Manufacturer of Monel 400 Fittings and Alloy 400 Buttweld Fittings for the petrochemical, nuclear, and oil & gas industries
Table of Content
- Monel 400 Fittings Specification Chart
- Monel K500 Reducer Chemical Composition
- Mechanical Properties Of Monel 400 Pipe Fittings
- Equivalent Grades Of Monel Pipe Fittings
- Alloy 400 Pipe Fittings Types
- Monel Alloy 400 End Cap Dimension
- Price Of Alloy 400 Fittings
- Monel 400 Forged Fittings Physical Properties
- Alloy 400 Elbow Advantages And Disadvantages
- ASTM F467 UNS N04400 Tee Heat Treatment
Monel 400 Fittings Specification Chart
| Specifications | ASME SB366/ ASTM B366 |
|---|---|
| Grades | Monel 400 |
| Size Ranges | ½ inch NB to 24 Inches NB in Schedule 40s, 10s, 80s, XXS, 160s, |
| Bending Radius | Radius=2D, 3D, 6D, 1D, 10D 5D, 8D, |
| Dimensions | ASME B16.28 | ANSI/ ASME B16.9 | MSS-SP-43 | BS4504 |BS1560 | BS10 |
| Types | Welded | Fabricated |Seamless |
| Thickness of Fitting | SCH10, XS, SCH120, SCH160, SCH60, SCH100, SCH30, SCH40, SCH140, XXS STD SCH80, SCH20,available with NACE MR 01-75 |
| Size Ranges | Seamless Butt-Weld Fitting: From 1/2 Inches - 10 Inches Welded ButtWeld Fitting: From 1/2 Inches - 48 Inches |
| Process of Manufacturing | Forge, Cast, Push, Press |
PED Approved Manufacturer of Alloy 400 Fittings and ASTM F467 UNS N04400 Tee/ Reducer and Stub End according to ASME B16.9, Check Monel 400 Forged Fittings specification and chemical composition
Monel K500 Reducer Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties Of Monel 400 Pipe Fittings
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Equivalent Grades Of Monel Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel 4400 Welded Elbows
Alloy 400 Elbow
Monel Alloy 400 End Cap
Nicorros Alloy 400 Concentric Reducer
SCH 80 Nickel Alloy 400 Elbow
Monel 400 Weld Fittings
Nickel 400 Monel Pipe Bend
Monel Buttweld Fittings
Monel Tube Fittings
ASTM B366 UNS N04400 Fittings
Alloy 400 45° Short Radius Elbow
ASTM B366 Monel 400 Pipe Fittings
Nicu 30fe Alloy 400 reducer
Monel Alloy 400 45° Long Radius Elbow
UNS N04400 Elbow
UNS N04400 Buttweld Fittings
Alloy 400 Fittings
Monel 400 90° Long Radius Elbow
Monel Fittings
Monel Seamless Fittings
Monel 400 Pipe Fittings
Alloy Monel 400 Return Bends
Monel 400 Tube Fittings
Monel Weld Fittings
Alloy 400 UNS N04400 Straight Tee
2.4360 Monel 400 180° Long Radius Elbow
Alloy 400 Pipe Reducer
Monel 400 Seamless Fittings
Monel 400 Alloy 90° Short Radius Elbow
Monel 400 Welded Pipe Fittings
Monel Elbow
Monel Pipe Fittings
UNS N04400 Alloy 400 Elbow
Monel Compression Fittings
Monel 400 Buttweld Fittings
Monel K500 Pipe Fittings
Nickel Copper Alloy 400 Equal Tee
Cast Alloy 400 Eccentric Reducer
Monel 2.4360 Short Radius Elbow
SCH 40 Monel 400 Elbow
Monel 400 Fittings
Alloy 400 Pipe Fittings
Monel Compression Tube Fittings
Nickel Alloy 400 Fittings
We Are largest Monel 400 Pipe Fittings Manufacturer in India, Check Alloy 400 Tube Fittings Specification, Weight and Dimensions
Monel Alloy 400 End Cap Dimension
| dimensions Of (d1 x s) | height of (L) | weight in kilogram |
| 21,3 x 2,0 | 9,0 | 0,01 |
| 26,9 x 2,0 | 9,0 | 0,01 |
| 33,7 x 2,0 | 13,0 | 0,02 |
| 42,4 x 2,0 | 13,0 | 0,04 |
| 48,3 x 2,0 | 13,5 | 0,05 |
| 60,3 x 2,0 | 18,5 | 0,07 |
| 76,1 x 2,0 | 20,5 | 0,10 |
| 88,9 x 2,0 | 25,0 | 0,15 |
| 114,3 x 2,0 | 28,0 | 0,26 |
| 114,3 x 3,0 | 29,0 | 0,39 |
| 139,7 x 3,0 | 38,5 | 0,60 |
| 168,3 x 3,0 | 47,5 | 0,90 |
| 219,1 x 3,0 | 63,5 | 1,32 |
| 273,0 x 3,0 | 93,0 | 1,95 |
| 323,9 x 3,0 | 102,0 | 2,70 |
| 355,6 x 3,0 | 109,0 | 3,80 |
| 406,4 x 3,0 | 123,0 | 5,00 |
| 457,2 x 3,0 | 123,0 | 6,10 |
| 508,0 x 3,0 | 133,0 | 7,60 |
Check monel fittings hs code, Thickness, Accept All Small/ Large Orders Of Alloy 400 Pipe Fittings at low price
| Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
| WELDOLET 12 X 3/4 (MONEL 400 PIPE FITTINGS) ASTM B564, UNS N04400 | ₹ 41,924/ NOS | $ 525.15 | € 524.39 | SAR 1974.95 | RM 2353.20 |
| REDUCING TEE SCH 40 BW ASTM B 366 GR WPNC S MONEL ALLOY 400UNS NO4400 | ₹ 100,748/ UNIT | $ 1262.00 | € 1260.17 | SAR 4746.05 | RM 5655.02 |
| ELBOW 1.5, SCH.XXS,BW 90 DEG LR, SB366 UNSN04400( PIPE FITTING ) MONEL400 NICKEL ALLOY | ₹ 36,037/ NOS | $ 451.41 | € 450.76 | SAR 1697.63 | RM 2022.77 |
| ALLOY 400 1 SCH 40 X 2 SCH 10 WOL (NICKEL ALLOY PIPE FITTING | ₹ 5,701/ PCS | $ 71.41 | € 71.31 | SAR 268.55 | RM 319.99 |
| ALLOY 400 1 3000# S/W FULL CPLG | ₹ 5,166/ PCS | $ 64.71 | € 64.62 | SAR 243.36 | RM 289.97 |
Monel 400 Forged Fittings Physical Properties
| Property | Metric Units |
| Melting Range | 1300-1350°C |
| Density | 8,800 kg/m³ @ 20°C |
| Coefficient of Thermal Expansion | 13.9 x 10 -6 / °C (20°C) |
| Curie Temperature | 20-50°C |
| Themal Conductivity | 21.8 W/m. °C @ 20°C |
| Thermal Capacity (Specific Heat) | 427 J/kg. °C @ 20°C |
| Electrical Conductivity | 32 % IACS |
| Electrical Resistivity | 0.547 microhm.m @ 20°C |
| Modulus of Elasticity (tension) | 179 GPa @ 20°C |
| Modulus of Rigidity (torsion) | 65.5 GPa @ 20°C |
| Poisson’s Ratio | 0.32 |
Alloy 400 Elbow Advantages And Disadvantages
- ASTM B164
- BS 3075
- DTD 204B
- 3076 NA 13
- High Strength and Corrosion-Resistant
- Increased Toughness
- Durable
- In a saltwater environment, exposure to pitting corrosion.
- Galvanic corrosion may sometimes occur in the presence of Monel.
- Poor Machinability
Huge Range of Werkstoff Nr. 2.4360 Concentric/ Eccentrice Reducer, Stub End and Monel K500 Fittings in India, We offer Eddy Current Testing / Non Destructive Testing on all products
ASTM F467 UNS N04400 Tee Heat Treatment
| Condition of Supply | Heat Treatment (After Forming) | |||
| Annealed/Spring Temper | Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool. | |||
| Condition | Approx Tensile Strength |
Approx Service Temp. |
||
| Spring Temper | 850 - 1050 N/mm2 | 123 - 152 ksi | -200 to +230°C | -330 to +445°F |
| Annealed | 400 - 600 N/mm2 | 58 - 87 ksi | -200 to +230°C | -330 to +445°F |
Are you worried about timely delivery in your country ? check our supply Network
Langeled Pipeline, England
Arab Gas Pipeline, kuwait
Iran-Pakistan-India gas pipeline, Iran
Hilton Steel © 2022 All Rights Reserved