Monel 400 Plate

Is Monel Plate more expensive than Alloy 400 Sheet?

A Monel plate is a high-strength item designed in thicknesses of above 6mm. The plate is designed with more steel in comparison to the sheet, making it slightly more expensive than the latter. An alloy 400 sheet in contrast is designed primarily to add an aesthetical outlook and focus more on weight saving.

How hard is Nickel Alloy UNS N04400 Strip?

The Nickel alloy UNS N04400 strip is a solid-solution alloy that is hardened via the cold working process. The hardness of these strips increases if there is a slight impairment of ductility or impact resistance. The strips are generally designed with a hardness of 65-80 HRB and are a common feature in different welding operations.

Does Monel 400 Coil rust?

The Monel 400 coil is a superalloy that has a chemical content of nickel and copper. This gives it good resistance to rust in harsh conditions. The coils are susceptible to rust if they are continuously exposed to air and moisture for prolonged periods. Since the coils are easy to transport and are used in different industries, they can be protected by performing periodic maintenance.

Corrosion Behavior of Monel 400 Plate in Seawater

A Monel 400 plate is a chromium and iron alloy that work well in flowing seawater. The plate is immune to chloride stress corrosion cracking in these environments. The plate is, however, susceptible to pitting and crevice corrosion in low velocity seawater, especially under fouling or decomposing organisms. The high-strength Monel 400 plate has excellent resistance against cavitation and erosion. The plate also provides economical protection against seawater splash zone against oil and gas platforms, etc.

We Help You To Save Your Cost By Providing Exact Size Of Alloy 400 Plate and Monel 400 Perforated Sheet

Monel Plate Specification

Buy Your Sizes From Our Alloy 400 Sheet and Din.2.4360 Shim Sheets Stock

Alloy 400 Plate Sizes

Monel Sheet Types

We are Largest Monel Sheet Suppliers in India, Check Sizes, Tolerance of Monel 400 Coil/ Foil/ Strip

Monel 400 Plate Price

Tolerance Chart Of Alloy 400 Sheet

Check Weight, Size Chart And Price List Of Alloy 400 2D/ Clad/ Hot Rolled Plates and Monel Plate Ex Mumbai

Nickel Alloy UNS N04400 Strip Features

• Excellent mechanical properties
• High strength and good weldability under a wide range of temperatures
• Non-magnetic
• Resistant to a wide range of corrosive media.
• Virtually immune to chlorine ion stress corrosion cracking

Get Alloy 400 Monel 2.4360 Slitting Coil In Cut To Sizes, Supplier Of Grade 400 Polished Sheet As Per International Standard

Monel 400 Sheet Uses

Chemical Composition Of Monel 400 Perforated Sheet

DIN 2.4360 Shim Sheets Mechanical Properties

Monel 400 Coil Equivalent Grades

Get the Local reference about material quality in your place of Living