Monel bolts & nuts suppliers in Mumbai

Monel fasteners manufacturer in india

Most reliable Monel hex bolts and Hex Head Bolts stockist in India

Monel fasteners

Monel fasteners

Monel hex bolts

Monel hex bolts

Monel bolts

Monel bolts

Huge experience as a Monel Fasteners manufacturer in India, Check Monel bolts & nuts online price list and sizes

Monel Keel Bolts standard sizes typically from 1/4 inch to 4 inches in diameter offer free shipping

Table of Content

Monel fasteners specifications

Monel fasteners specifications

Size Specifications Length Test certificates
M3 – M56 ASME SF467/ ASTM F467 3mm to 200mm
  • Raw Materials Certificate
  • EN 10204/3.1B
  • Third Party Inspection Report, etc
  • 100% Radiography Test Report
Tensile strength Application Thread International Standard
550 MPa
  • Power Plant
  • Oil and Gas
  • Energy
  • Aerospace
  • Pulp & Paper Indusry
  • Food Processing
  • Petrochemical
  • Chemical
  • Refining
  • Pharmaceuticals
 BSW, METRIC, UNF, UNC, BSF, custom BS, UNI, ANSI, ISO, IS, JIS, GB, ASME, ASTM DIN
Grades Coating Iso Standard Head Drive
Monel 400/ K500 PTFE, zinc plated, black phosphate, hot dip galvanized ISO 4033, ISO 4032 Phillips/Slot, Phillips, Slotted, Six-Lobe
With MTC EN 10204 3.1 & 3.2 test reports, a large selection of Monel Alloy U-bolts and Carriage Bolts are available to fulfil your needs

Types of Monel alloy fasteners

Monel carriage bolt

Monel carriage bolt

  • Applications: Petrochemical, Power Generation, Oil and Gas

Monel alloy heavy hex bolt

Monel alloy heavy hex bolt

  • Yield strength: 240 MPa
  • Tensile strength: 550 MPa

Monel hex head bolt

Monel hex head bolt

  • Standards: ASTM F467
  • Sizes: M3- M56

Monel keel bolts

Monel keel bolts

  • Coatings: PTFE, black phosphate, zinc plated, hot dip galvanized

Monel bolts & nuts

Monel bolts & nuts

  • Thread types: Metric, Metric Fine, BSW, BSF, UNC, UNF and BA

Monel alloy u bolt

Monel alloy u-bolt

  • Temperature range: cryogenic up to 1000°F
  • Length: 3mm to 200mm
Refer Monel Heavy Hex Bolts, Shoulder Bolt and eye bolts torque sizes and properties as per ISA, ISO, British & American Standards

Monel hex bolt chemical composition

Grade C (Maximum) Mn (Maximum) Si (Maximum) S (Maximum) Cu Fe Ni (Minimum)
Monel K500 0.25 1.5 0.5 0.010 27.00 – 33.00 0.5 – 2 63.00
Monel 400 0.30 2.00 0.50 0.024 28.00 – 34.00 2.50imum 63.00

Mechanical properties of monel keel bolts

Monel Grade Melting Point Density Yield Strength (0.2%Offset) Tensile Strength Elongation
K500 1350 °C (2460 °F) 8.44 g/cm3 Psi – 115000 , MPa – 790 Psi – 160000 , MPa – 1100 20 %
400 1350 °C (2460 °F) 8.8 g/cm3 Psi – 35,000 , MPa – 240 Psi – 80,000 , MPa – 550 40 %

Equivalent of Monel bolts & nuts

STANDARD UNS WERKSTOFF NR. GOST JIS BS EN AFNOR
Monel Alloy K500 N05500 2.4375 – – – – –
Monel Alloy 400 N04400 2.4360 МНЖМц 28-2,5-1,5 NW 4400 NA 13 NiCu30Fe NU-30M

Monel alloy u-bolt physical properties

Physical Properties Metric English
Density 8.8 g/cc 0.318 lb/in³
Thermal Properties
CTE, linear 20°C 13.9 µm/m-°C 7.72 µin/in-°F
Heat Capacity 0.427 J/g-°C 0.102 BTU/lb-°F
Solidus 1300 °C 2370 °F
Liquidus 1350 °C 2460 °F
Thermal Conductivity 21.8 W/m-K 151 BTU-in/hr-ft²-°F
Melting Point 1300 – 1350 °C 2370 – 2460 °F
Electrical Properties
Curie Temperature 35 °C 95 °F
Electrical Resistivity 5.47e-005 ohm-cm 5.47e-005 ohm-cm

Monel hex bolts dimensions

Monel hex bolts dimensions

NOMINAL SIZES (D) HEAD THK ACRO THE FLATS ACRO CORNERS BODY DIA.
H (MAX) H (MIN) F (MAX) F (MIN) C (MAX) C (MIN) D (MAX) D (MIN)
m100 63.9 60.10 145.00 140.00 167.43 159.60 90.00 99.13
m36 23.38 21.63 55.00 53.80 63.51 60.79 36.00 35.61
m48 31.07 28.93 75.00 72.60 86.60 82.76 48.00 47.38
m20 12.88 12.12 30.00 29.16 34.64 32.95 20.00 19.67
m12 7.76 4.24 19.00 17.73 20.78 20.03 12.00 11.73
m14 9.09 8.51 22.00 20.67 24.25 23.35 14.00 13.73
m10 6.63 6.17 17.00 15.73 18.48 17.77 10.00 9.78
m16 10.32 9.68 24.00 23.67 27.71 26.75 16.00 15.73
m30 19.48 17.92 46.00 45.00 53.12 50.85 30.00 29.67
m24 15.44 14.56 36.00 35.00 41.57 39.55 24.00 23.67
m56 36.2 33.80 85.00 82.20 98.15 93.71 56.00 55.26
m42 26.97 25.03 65.00 62.90 75.06 71.71 42.00 41.38
m64 41.32 38.68 95.00 91.80 109.70 104.65 64.00 63.26
m80 51.58 48.42 115.00 111.00 132.72 126.54 80.00 79.26
m72 46.45 43.55 105.00 101.40 121.24 115.60 72.00 71.26
m90 57.74 54.26 130.00 125.50 150.11 143.07 90.00 89.13

Monel alloy stud bolts torque chart

Size ANSI/ ASME B16.5 150# Full Face Gaskets ANSI/ ASME B16.5 150# Ring Face Gaskets
Torque And Round (ft-lbs) Stud Bolts Tighten Sequence Torque And Round (ft-lbs) Stud Bolts Tighten Sequence
1st 2nd Final Dwg* Size Of Bolts 1st 2nd Final Dwg Size Of Bolts
1/2 20 40 60 4-bolt 1/2 10 20 30 4-bolt 1/2
3/4 20 40 60 4-bolt 1/2 13 27 40 4-bolt 1/2
1 20 40 60 4-bolt 1/2 15 30 50 4-bolt 1/2
1-1/4 20 40 60 4-bolt 1/2 20 40 60 4-bolt 1/2
1-1/2 20 40 60 4-bolt 1/2 20 40 60 4-bolt 1/2
2 40 80 120 4-bolt 5/8 40 80 120 4-bolt 5/8
2-1/2 40 80 120 4-bolt 5/8 40 80 120 4-bolt 5/8
3 40 80 120 4-bolt 5/8 40 80 120 4-bolt 5/8
3-1/2 40 80 120 8-bolt 5/8 40 80 120 8-bolt 5/8
4 40 80 120 8-bolt 5/8 40 80 120 8-bolt 5/8
5 60 120 200 8-bolt 3/4 60 120 200 8-bolt 3/4
6 60 120 200 8-bolt 3/4 60 120 200 8-bolt 3/4
8 60 120 200 8-bolt 3/4 60 120 200 8-bolt 3/4
10 95 190 320 12-bolt 7/8 95 190 320 12-bolt 7/8
12 95 190 320 12-bolt 7/8 95 190 320 12-bolt 7/8
14 147 294 490 12-bolt 1 147 294 490 12-bolt 1
16 147 294 490 16-bolt 1 147 294 490 16-bolt 1
18 213 426 710 16-bolt 1-1/8 213 426 710 16-bolt 1-1/8
20 213 426 710 20-bolt 1-1/8 213 426 710 20-bolt 1-1/8
24 300 600 1,000 20-bolt 1-1/4 300 600 1,000 20-bolt 1-1/4

Our Products