ASTM A276 type 317L rod manufacturer in India

Stainless steel 317L round bar supplier in India

Cut out all intermediaries and contact directly to 317L stainless steel rounds supplier to save your cost in the India

Stainless steel 317L round bar

Stainless steel 317L round bar

317L stainless steel rounds

317L stainless steel rounds

ASTM A276 type 317L rod

ASTM A276 type 317L rod

317L round bar and UNS S31703 flat bar easily available from 1/4″ up to 3″ diameters

Stainless steel 317L round bar specifications

Stainless steel 317L round bar specifications

Width Sizes Condition
100 to 3000 mm Diameter: 0.1 to 100 mm Annealed.Hardened & tempered
Tolerance Specification Finish
H9, H8, H10, H12, H11,H13, K10, K9, K12, K11 ASTM A276 | ASME SA276 Rough Turned, Polish, Bright, Grinding
Stainless steel 317L bar and ASTM A276 Type 317L hex bars stock available in Peeled or Turned Ground condition

SS 317L bar types

317L round bar

317L round bar

  • Dia: 0.1 to 100 mm
  • Temperature range: 1010 °C -1121°C or 1850°F – 2050°F

SS 317L bar

SS 317L bar

  • Tensile Strength : 620mpa
  • Yield strength : 275mpa

Stainless steel 317L bar

Stainless steel 317L bar

  • Length: 100 to 3000 mm
  • Hex Bar Size : 2-100mm A/F

UNS S31703 flat bar

UNS S31703 flat bar

  • Standards: ASTM A276, ASME SA276 / ASTM A479 ASME SA479

DIN 1.4438 cold drawn bar

DIN 1.4438 cold drawn bar

  • Types: coil, foils, rolls, plain sheet, shim sheet, perforated sheet

ASTM A276 Type 317L hex bar

ASTM A276 Type 317L hex bar

  • Hardness: Soft, hard, half hard, quarter, spring hard
SS 317L bar and AISI 317L square bars used in gas processing, condensers, pulp and paper industry

ASTM A276 Type 317L hex bar chemical composition

Grade Mn C Si S P Ni Cr Mo N
SS 317L 2 max 0.035 max 1 max 0.03 max 0.040 max 11 – 15 18 – 20 3 – 4

ASTM A276 type 317L rod mechanical properties

Density Tensile Strength Melting Point Elongation Yield Strength (0.2%Offset)
8.0 gram/cm3 Psi – 75000 , MPa – 515 1454 °C (2650 °F) 35 % Psi – 30000 , MPa – 205

317L round bar equivalent

STANDARD UNS WERKSTOFF NR. JIS BS GOST AFNOR EN
SS 317L S31703 1.4438 SUS 317L X2CrNiMo18154

Recommended grades