Can I Bend Threaded Rod?
A threaded rod can be bent to meet its intended application. This can be performed by placing two bolts in the vice again and clamping it around the rod. After this, a lighted torch is used to bend the rod. Too much heat can damage the metal; however, if a reddish color appears, it is ready to bend.
How Much Weight Can 10mm Threaded Bar Hold?
A 10mm threaded rod with pitch thread of 1.5mm can hold a minimum load of 13.1 kg at 4.6 property class. Similarly, 8.8 and 10.9 property classes can hold 33.6 and 48.1kgs weight respectively.
How Is Acme Threaded Rod Size Measured?
A threaded rod in metric sizes can be measured based on its thread pitch rather than thread count. The thread pitch is expressed in millimeters and is the distance between the threads. A threaded rod is measured in diameter based on threading x length. E.g. a threaded rod measuring ¼--20 x 6 feet. Here ¼ is the rod diameter with 20 inferring that there are 20 threads per inch in a rod. The 6 feet infers how long the rod is.
Stainless Steel Threaded Rod Advantages And Disadvantages
A stainless steel threaded rod is threaded completely along its shaft and can be affixed easily. These rods have enhanced corrosion resistance, with excellent mechanical properties. The threaded rod has low maintenance and is very environmentally friendly. They have superior durability and are very economical. The high-strength fasteners are easy to maintain and clean.
Stainless steel threaded rods are; however, expensive and require professionals to install them. The rods are slightly difficult to weld or fabricate and are prone to damage.
Table of Content
Weight Chart Of Ss 304 Threaded Bar
Approximate weight in Kgs per metre per pc. | |||
Size (MM) | Weight per Metre | Size (UNC) | Weight per Mtr |
M2 | 0.0187 | ||
M2.5 | 0.030 | ||
M3 | 0.044 | ||
M3.5 | 0.060 | ||
M4 | 0.078 | ||
M5 | 0.124 | ||
M6 | 0.177 | ¼” | 0.194 |
M8 | 0.319 | 5/16” | 0.323 |
M10 | 0.500 | 3/8” | 0.469 |
7/16” | 0.650 | ||
M12 | 0.725 | ½” | 0.896 |
M14 | 0.970 | 9/16” | 1.096 |
M16 | 1.330 | 5/8” | 1.342 |
M18 | 1.650 | ||
M20 | 2.080 | ¾” | 2.021 |
M22 | 2.540 | 7/8” | 2.756 |
M24 | 3.000 | 1” | 3.638 |
M27 | 3.850 | 1 1/8” | 4.545 |
M30 | 4.750 | 1 ¼” | 5.718 |
M33 | 5.900 | 1 3/8” | 6.842 |
M36 | 6.900 | 1 ½” | 8.281 |
M39 | 8.200 | 1 5/8” | 9.726 |
M42 | 9.400 | 1 ¾” | 11.231 |
M45 | 11.000 | 1 7/8” | 13.038 |
M48 | 12.400 | 2 | 14.741 |
1/2″-13 x 2″ | 3/8″-16 x 3″ |
3/8″-16 x 3/4″ | 3/8″-16 x 2″ |
3/4″-10 x 2-1/2″ | 1/2″-13 x 1-1/2″ |
5/8″-11 x 2-1/2″ | 5/8″-11 x 4″ |
3/8″-16 x 1″ | 5/16″-18 x 1″ |
3/8″-16 x 1-1/4″ | 3/8″-16 x 1-1/2″ |
5/8″-11 x 3″ | 1/2″-13 x 3″ |
3/4″-10 x 3″ | 1/2″-13 x 2-1/2″ |
5/16″-18 x 1-1/4″ | 3/8″-16 x 2-1/2″ |
1/4″-20 x 1″ | 1/2″-13 x 1-1/4″ |
Threaded Rod
Stainless Steel Threaded Rod
ACME Threaded Rod
SS 304 Threaded Bar
Hollow Threaded Rod
Stainless Threaded Rod
SS Threaded Rod
Threaded Stud
304 Stainless Steel Threaded Rod
Stainless Steel Double End Threaded Rod
Chemical Composition Of Threaded Hollow Rod
Type | Carbon | Manganese | Phosphorus | Sulphur | Silicon | Chromium | Nickel | Molybdenum |
---|---|---|---|---|---|---|---|---|
302 | 0.15 | 2.00 | 0.045 | 0.030 | 1.00 | 17.00/19.00 | 8.00/10.00 | – |
309 | 0.20 | 2.00 | 0.045 | 0.030 | 1.00 | 22.00/24.00 | 12.00/15.00 | – |
304L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/12.00 | – |
304* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/10.50 | – |
309S | 0.08 | 2.00 | 0.045 | – | 1.00 | 22.00/24.00 | – | – |
317 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00/1.00 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
316* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
310 | 0.25 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
316L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
347 | 0.08 | 2.00 | 0.040 | 0.030 | 0.5/1.00 | 17.00/19.00 | 9.00/12.00 | 0.5/0.75 |
317L | 0.03 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 17.00/19.00 | 9.00/12.00 | 0.75/0.75 |
Stainless Steel Double End Threaded Rod Benefits
Threaded Anchor Rod Mechanical Properties
Types | UNS NO | Yield (ksi) minimum |
Tensile (ksi) minimum |
Elongation minimum |
Hardness (Rockwell B) maximum |
Hardness (Brinell) maximum |
---|---|---|---|---|---|---|
304* | S30400 | 30 | 75 | 40% in 2″ | 88 | 183 |
302 | S30200 | 30 | 75 | 40% in 2″ | 88 | 183 |
309 | S30900 | 30 | 75 | 40% in 2″ | 95 | 217 |
304L* | S30403 | 30 | 70 | 40% in 2″ | 88 | 183 |
310 | S31000 | 30 | 75 | 40% in 2″ | 95 | 217 |
309S | S30908 | 30 | 75 | 40% in 2″ | 95 | 217 |
310S | S31008 | 30 | 75 | 40% in 2″ | 95 | 217 |
316* | S31600 | 30 | 75 | 40% in 2″ | 95 | 217 |
316L* | S31603 | 25 | 70 | 35% in 2″ | 95 | 217 |
317L | S31703 | 30 | 75 | 35% in 2″ | 95 | 217 |
317 | S31700 | 30 | 75 | 35% in 2″ | 95 | 217 |
347 | S34700 | 30 | 75 | 40% in 2″ | 88 | 183 |
321 | S32100 | 30 | 75 | 40% in 2″ | 88 | 183 |
Stainless Steel 304 Threaded Rod Equivalent
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
SS 304L | 1.4306 / 1.4307 | S30403 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
SS 304H | 1.4301 | S30409 | – | – | – | – | – |
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310H | – | S31009 | – | – | – | – | – |
SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
SS 316H | 1.4401 | S31609 | – | – | – | – | – |
SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
SS 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
SS 317L | 1.4438 | S31703 | SUS 317L | – | – | – | X2CrNiMo18-15-4 |
SS 321 | 1.4541 | S32100 | SUS 321 | – | – | – | X6CrNiTi18-10 |
SS 321H | 1.4878 | S32109 | SUS 321H | – | – | – | X12CrNiTi18-9 |
SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Metric Threaded Rod Dimensions
M4 304 | ![]() |
M5 304 | ![]() |
M6 304 | ![]() |
M8 304 | ![]() |
M10 304 | ![]() |
M12 304 | ![]() |
M16 304 | ![]() |
M20 304 | ![]() |
M24 304 | ![]() |
M3 316 | ![]() |
M4 316 | ![]() |
M5 316 | ![]() |
M6 316 | ![]() |
M8 316 | ![]() |
M10 316 | ![]() |
M12 316 | ![]() |
M14 316 | ![]() |
M16 316 | ![]() |
M18 316 | ![]() |
M20 316 | ![]() |
M22 316 | ![]() |
M24 316 | ![]() |
M27 316 | ![]() |
M30 316 | ![]() |
M33 316 | ![]() |
M36 316 | ![]() |
Application Of SS Threaded Rod
BOLT DIA |
Torque FT-LBS | ||
30% Initial Torque |
70% Torque |
100% Final Torque |
|
1/2 | 17 | 39 | 55 |
9/16 | 24 | 55 | 80 |
5/8 | 33 | 77 | 110 |
3/4 | 59 | 137 | 195 |
7/8 | 93 | 217 | 310 |
1 | 140 | 325 | 465 |
1.1/8 | 205 | 480 | 685 |
1¼ | 288 | 672 | 960 |
1.3/8 | 391 | 915 | 1305 |
1½ | 518 | 1208 | 1725 |
1.9/16 | 588 | 1372 | 1960 |
1.5/8 | 668 | 1558 | 2225 |
1¾ | 840 | 1960 | 2800 |
1.7/8 | 1044 | 2436 | 3480 |
2 | 1280 | 2985 | 4265 |
2¼ | 1850 | 4315 | 6165 |
2½ | 2565 | 5985 | 8550 |
2¾ | 3121 | 7282 | 10400 |
3 | 4080 | 9520 | 13600 |
BOLT DIA |
Torque Nm | ||
30% Initial Torque |
70% Torque |
100% Final Torque |
|
1/2 | 23 | 53 | 75 |
9/16 | 33 | 75 | 108 |
5/8 | 45 | 104 | 149 |
3/4 | 80 | 186 | 264 |
7/8 | 126 | 294 | 420 |
1 | 190 | 441 | 630 |
1.1/8 | 278 | 651 | 929 |
1¼ | 390 | 911 | 1302 |
1.3/8 | 530 | 1241 | 1769 |
1½ | 702 | 1638 | 2339 |
1.9/16 | 797 | 1860 | 2657 |
1.5/8 | 906 | 2112 | 3017 |
1¾ | 1139 | 2657 | 3796 |
1.7/8 | 1415 | 3303 | 4718 |
2 | 1735 | 4047 | 5783 |
2¼ | 2508 | 5850 | 8359 |
2½ | 3478 | 8115 | 11592 |
2¾ | 4232 | 9873 | 14101 |
3 | 5532 | 12907 | 18439 |
316 Stainless Steel Threaded Rod Prices
Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
M16 THREADED ROD 1 METER | ₹ 1,377/ PCS | $ 17.29 | € 17.03 | SAR 64.97 | RM 77.77 |
TYPE 316 STAINLESS STEEL THREADED ROD 3/4-10 THREAD, 1 FOOTLONG, | ₹ 1,795/ PCS | $ 22.53 | € 22.19 | SAR 84.66 | RM 101.34 |
THREADED ROD M16X1000 STAINLESS STEEL DIN975 | ₹ 1,217/ PCS | $ 15.28 | € 15.05 | SAR 57.42 | RM 68.73 |
SS 200 THREADED ROD M8, M16 | ₹ 79/ KGS | $ 0.99 | € 0.98 | SAR 3.72 | RM 4.45 |
THREADED ROD M16X2 X300 LONG 18-8 STAINLESS STEEL | ₹ 4,509/ NOS | $ 56.61 | € 55.75 | SAR 212.73 | RM 254.63 |
Threaded Rod Load Capacity Chart
Thread Size | Stress Area (mm²) | Minimum Proof Load (kg) |
M3 | 5 | 112 |
M4 | 8.8 | 204 |
M5 | 14.2 | 326 |
M6 | 20.1 | 459 |
M8 | 36.6 | 836 |
M10 | 58 | 1335 |
M12 | 84.3 | 1937 |
M16 | 157 | 3598 |
M20 | 245 | 5617 |
Take the reference of our quality and timely delivery from our clients in following cities
Knpc Clean Fuel Project, Belgium
Petrokemya Abs Project, Saudi Arabia
Terminal Lng Budowa, Poland
Hilton Steel © 2022 All Rights Reserved