What Titanium Filler Wire Used For?
The titanium filler wire is utilized by gas tungsten arc welding and the plasma arc welding process. These wires are typically seen in applications of industrial fans, pressure vessels, and aircraft components. The wires are also utilized in compressor blades, the automobile industry, and jet engine parts. They are also seen in power plant condensers, missiles, watches, jewelry, etc.
Is titanium filler rod Rust Proof?
The titanium filler rod works well in moist atmospheres that induce corrosion. It also has good resistance to pitting, stress corrosion, and chlorides or chlorines. It also is tolerant to most organic materials like nitric or sulfuric acids. However, titanium filler rods are prone to reducing oxygen and chromium salts. This may result in the material beginning to rust or corrode in harsh conditions.
10 Benefits Of Using ERTi-1 Titanium Welding Wire
The ERTi-1 titanium welding wire is one of the softest and most ductile grades. This welding wire exhibits excellent formability in the system. The unalloyed titanium wire showcases excellent corrosion resistance properties and works in different conditions. Having excellent welding capacity, they can easily fill up space between different materials. The material works well in fabricating anodes for cathodic protection applications. It has a lower thermal expansion with a high melting point. It also has good performance in lower temperatures. The lightweight wires possess good strength. It showcases enhanced impact toughness that allows it to be used in different applications. The wires are less dense and easy to use and maintain.
Difference Between ERTi-2 Titanium Welding Wire and ERTi-5 Titanium Welding Wire
The ERTi-2 titanium welding wire is designed from the commercially pure alpha alloy. The ERTi-5 titanium welding wire is an alpha-beta alloy. The gr 5 ERTi wire has better strength and thickness in comparison to the other. The ERTi-2 welding wire has similar corrosion resistance properties to gr 5; however, it is cheaper. The gr 5 welding wire can handle more heat and pressure, while the gr wire is more ductile.
Table of Content
Astm Specification Of Titanium Filler Rod
Grade | Specifications | ||
AWS A5.16 – Titanium Welding Wire | ASTM B863 – Titanium Wire | AMS | |
Commercial Pure Titanium | ERTi-1,2,3,4 | ASTM B863 Gr1,2,3,4 | AMS 4951 |
ASTM F67 Gr1,2,3,4 | AMS 4921 | ||
Ti 6Al-4V | ERTi-5 | ASTM B863 Gr5 | AMS 4954 |
Ti 6Al-4V Eli | ERTi-5 Eli | ASTM B863 Gr23 | AMS 4956 |
ASTM F136 Eli | |||
Ti 0.2 Pd | ERTi-7 | ASTM B863 Gr7 | – |
Ti 3Al-2.5V | ERTi-9 | ASTM B863 Gr9 | – |
Ti 0.3Mo-0.8Ni | ERTi-12 | ASTM B863 Gr12 | – |
Titanium Filler Wire Specification
Forms | TIG cut lengths,MIG spools, Coils and Reels |
Classification | ERTi-2, AWS A5.16 |
Type Of Welding | Inert Gas Welding |
Applications |
|
TIG straight lengths | 36” (914 mm) or 39” (1000 mm) length |
Mechanical Properties Of Titanium Tig Rod
Melting Point 1660°C
Ult Tensile Strength 890 N/mm²
Hardness 57 HV
Tig Welding Titanium Filler Rod Types
Titanium Filler Rod
ERTi-1 Titanium Welding Wire
ERTi-2 Titanium Welding Wire
ERTi-5 Titanium Welding Wire
Titanium Filler Wire
Ti Welding Electrode
Ti Alloy Welding Rod
UNS R50100 Tig Wire
Alloy Ti Welding Filler Rod
Titanium Filler Metal
Pure Titanium Welding Wire
AWS A5.16 | UNS | AMS | ASTM B 348 | C | O | N | H | Fe | Other |
2004 | Number | ||||||||
ERTi-1 | R50100 | AMS 4951 | Grade-1 | 0.03 | 0.03-0.10 | 0.012 | 0.005 | 0.08 | |
ERTi-2 | R50120 | AMS 4951 | Grade-2 | 0.03 | 0.08-0.16 | 0.015 | 0.008 | 0.12 | |
ERTi-3 | R50150 | AMS 4951 | Grade-3 | 0.03 | 0.13-0.20 | 0.02 | 0.008 | 0.16 | |
ERTi-4 | R50130 | AMS 4951 | Grade-4 | 0.03 | 0.18-0.32 | 0.025 | 0.008 | 0.25 | |
ERTi-5 | R56400 | AMS 4954 | Grade-5 | 0.05 | 0.12-0.20 | 0.03 | 0.015 | 0.22 | Al 5.5-6.5 |
V 3.5-5.5 | |||||||||
ERTi-7 | R52401 | N/A | Grade-7 | 0.03 | 0.08-0.16 | 0.015 | 0.008 | 0.12 | Pd 0.12-0.25 |
ERTi-9 | R56320 | N/A | Grade-9 | 0.03 | 0.08-0.16 | 0.022 | 0.008 | 0.25 | |
ERTi-12 | R53400 | N/A | Grade-12 | 0.03 | 0.08-0.16 | 0.015 | 0.008 | 0.15 | Mo 0.6-0.9 |
Ni 0.2-0.4 | |||||||||
ERTi-23 | R56408 | AMS 4956 | Grade-5 ELI | 0.03 | 0.03-0.11 | 0.012 | 0.005 | 0.2 | Al 5.5-6.5 |
V 3.5-5.5 |
Titanium Tig Filler Rod Diameter
Diameter in | 0.030 | 0.031 | 0.035 | 0.039 | 0.045 | 0.047 | 0.062 | 0.078 | 0.093 | *0.125 | *0.156x | 0.187x |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Diameter mm | 0.76 | 0.80 | 0.89 | 1.00 | 1.10 | 1.20 | 1.60 | 2.00 | 2.40 | *3.20 | *4.00x | *4.70x |
Titanium Tig Welding Rod Welding Procedure
Filler Wire Sizes | Amps | Tungsten | Volts | Argon (cfh) | Gas Cup Sizes | Base thickness |
1/16” | 100-185 | 1/16” | 9-12 | 20 | 1/2” | 1/16-1/8” |
1/8” | 200-375 | 1/8” | 11-15 | 30 | 3-4” | 1/4-1/2” |
3/32” | 150-250 | 3/32” | 11-15 | 25 | 5/8” | 1/8- 3/16” |
TYPICAL GMAW WELDING PROCEDURES; DCEP Short Circuit |
||||
Wire Diameter | Wire Speed (ipm) | Amps | Volts | Ar & Ar+He (cfh) |
0.030 | 450-650 | 100-195 | 16-20 | 35-65 |
0.035 | 480-420 | 165-285 | 18-27 | 35-65 |
0.045 | 500-880 | 250-360 | 31-35 | 35-65 |
Sizes Of Titanium Welding Filler Rod
Description | Size (English Units) | Size (Metric Units) |
Wire | Dia(0.0012〃・0・236〃)x St raightle ngth/Spool/Coil | Dia(0.03 - 6mm) x Straightlength/Spool/Coil |
Welded Wire | Dia(0・002〃・0・4〃)x Straightlength/Spool/Coil | Dia(0.05 ・ 10mm)x St raightlength/Spool/Coil |
Application Of Titanium Filler Metal
Titanium Welding Electrode Price
Description | Price in India | Price in USD | Price in Euro | Price in Saudi Riyal | Price in Ringgit |
TITANIUM FILLER WIRE DIA 1.0 X 1000 MM L AWS 5.16 ERTI2 | ₹ 4,500/ KGS | $ 56.35 | € 56.15 | SAR 211.70 | RM 252.56 |
TITANIUM FILLER WIRES ASTM B 863 GRADE 2, SIZE: DIA 2.0 MM & DIA 1.6 MM | ₹ 1,757/ KGS | $ 22.00 | € 21.92 | SAR 82.65 | RM 98.60 |
TITANIUM FILLER WIRE ERTI 2 DIA 1.6X1000 MM | ₹ 4,747/ KGS | $ 59.44 | € 59.23 | SAR 223.31 | RM 266.41 |
TITANIUM FILLER WIRE ERTI-3 DIA2.0XL1000MM | ₹ 3,003/ KGS | $ 37.60 | € 37.46 | SAR 141.26 | RM 168.52 |
TITANIUM FILLER WIRE AWS A5.16-2007 ERTi-2 DIA 2.0XL1000MM | ₹ 3,080/ KGS | $ 38.57 | € 38.43 | SAR 144.91 | RM 172.87 |
TITANIUM TIG WELDING RODS 2.0MMX150MM | ₹ 539/ KGS | $ 6.75 | € 6.73 | SAR 25.36 | RM 30.25 |
ERTI2 TIG WELDING ROD 8.0MM | ₹ 648/ KGS | $ 8.11 | € 8.08 | SAR 30.47 | RM 36.35 |
Titanium Welding Wire Chemical Composition
AWS A5.16 | UNS | AMS | ASTM B 348 | C | O | N | H | Fe | Other |
2004 | Number | ||||||||
ERTi-1 | R50100 | AMS 4951 | Grade-1 | 0.03 | 0.03-0.10 | 0.012 | 0.005 | 0.08 | |
ERTi-2 | R50120 | AMS 4951 | Grade-2 | 0.03 | 0.08-0.16 | 0.015 | 0.008 | 0.12 | |
ERTi-3 | R50150 | AMS 4951 | Grade-3 | 0.03 | 0.13-0.20 | 0.02 | 0.008 | 0.16 | |
ERTi-4 | R50130 | AMS 4951 | Grade-4 | 0.03 | 0.18-0.32 | 0.025 | 0.008 | 0.25 | |
ERTi-5 | R56400 | AMS 4954 | Grade-5 | 0.05 | 0.12-0.20 | 0.03 | 0.015 | 0.22 | Al 5.5-6.5 |
V 3.5-5.5 | |||||||||
ERTi-7 | R52401 | N/A | Grade-7 | 0.03 | 0.08-0.16 | 0.015 | 0.008 | 0.12 | Pd 0.12-0.25 |
ERTi-9 | R56320 | N/A | Grade-9 | 0.03 | 0.08-0.16 | 0.022 | 0.008 | 0.25 | |
ERTi-12 | R53400 | N/A | Grade-12 | 0.03 | 0.08-0.16 | 0.015 | 0.008 | 0.15 | Mo 0.6-0.9 |
Ni 0.2-0.4 | |||||||||
ERTi-23 | R56408 | AMS 4956 | Grade-5 ELI | 0.03 | 0.03-0.11 | 0.012 | 0.005 | 0.2 | Al 5.5-6.5 |
V 3.5-5.5 |
Get the Local reference about material quality in your place of Living
255 MW Open Cycle Power Plant, Oman
Weatherford - Cielo Abu Dhabi
AKSA Power Generation, USA
Hilton Steel © 2022 All Rights Reserved